Better welding performance for sub arc apps

Share This Post

ESAB Welding and Cutting Products’s new Aristo 1000 AC/DC power source for sub arc welding is an inverter power source that can be connected to three-phase input voltage supply (from 380 to 575V at 50 or 60 Hz).

This power source uses unique, patent-pending technologies to deliver the best welding performance with the lowest power consumption. The result is a power source that will deliver more welding per kilowatt-hour.

It allows the user to switch between AC and DC currents without stopping the welding process. This “on the fly” function minimizes downtime and maximizes weld quality because the user doesn’t have to stop and re-start when changing currents.

The new power source offers full control of the settings for AC welding. Using the Bead Profile Modeling function gives the operator full control over the AC frequency, balance and offset.  This allows the user to optimize penetration profile, heat input, deposition rate, arc stability and stirring effect to suit the situation and need.

Two Aristo 1000 AC/DC units can easily be connected in synchronized parallel mode to deliver more welding current. This machine is designed for heavy-duty industrial environments and is ideal for welding wind tower structures, nuclear components, beams, bridge components, trailer beams, excavator components, and for general fabrication.

The unit features cable boost technology, which stores energy and instantly delivers up to 450% per cent more energy when needed, claims ESAB. Users can double the maximum usable weld cable length without compromising weld quality.

Cable boost saves energy by re-using the inductive energy generated in the welding cables in the welding process instead of allowing that energy to be wasted as heat and power loss.

The Aristo 1000 AC/DC is perfect for automated welding. A DC arc is normally used for the root pass to achieve full penetration.  With the “on the fly” switching function, the operator can switch over to an AC arc without stopping the process when welding on round objects. This minimizes downtime and the risk of weld defects as the stop and re-start sequence is completely eliminated.

One of the most common reasons for a production stop in a welding installation is damaged cables or broken connectors.  The Aristo 1000 AC/DC has no connectors or cables at any exposed positions.  All cables are connected behind a door in the front of the machine, making them easily accessible for service while being well protected from damage.

The cooling fan only runs during welding, which results in less energy required and consumed, lower noise levels, and less dust inside the cooling channel.

Column and Boom (CaB) System

For the ultimate automated sub arc welding package, combine the Aristo 1000 AC/DC inverter with the Column and Boom (CaB) system and Spoolarc 81 wire.

The CaB offers short set-up times and fast, exact work piece positioning. Travel speeds are pre-programmable and the column is capable of 180-degree rotation. Any ESAB A2 or A6 welding head can be mounted to the boom with a swiveling mounting bracket, allowing the welding head to perform external and internal longitudinal and circumferential welding in various weld joints and work pieces.

The CaB is available with different types of foundation and you can choose from stationary or rail-traveling carriages.

Spoolarc 81 Wire

Spoolarc 81 is a medium manganese and silicon wire with nominal rust and mill scale tolerance. This wire is ideal for general purpose welding on low and medium carbon steels. When paired with OK Flux, Spoolarc 81 yields excellent results in demanding environments.

Spoolarc 81 used in conjunction with the CaB system and the brand-new Aristo 1000 AC/DC power source yields superior results.



Share This Post

Recent Articles

Wordpress Social Share Plugin powered by Ultimatelysocial

Enjoy this post? Share with your network