Click image to enlarge

Miller Electric Mfg. Co. has launched wireless remote hand and foot controls for welding, designed to improve productivity, reduce clutter in the work area, and eliminate expensive cords and extensions that are exposed to industrial wear and tear.

Miller’s new wireless products include the first ever Wireless Remote Foot Control for TIG welding, and the Wireless Remote Hand Control for Stick, TIG, MIG and Flux Cored welding.

Miller’s wireless remote controls provide the same responsiveness, performance and effectiveness of corded models and are easy to use. A wireless remote eliminates the potential wear and failure of a remote cord and the associated downtime/cost of replacement. It improves productivity by allowing the welder to quickly reposition the remote around the work area without having to untangle cords. Safety is also improved through reduced clutter and fewer tripping hazards in the work area.

The Wireless Remote Foot Control, designed for TIG welding in manufacturing, fabrication and plant applications, allows the operator to adjust amperage at the point of use without being limited to the range of the remote cord. The Wireless Remote Hand Control, designed for Stick, TIG, MIG and Flux Cored welding, allows the operator to adjust parameters for different joint configurations, electrodes and wire types/sizes at the point of use instead of walking back to the machine. Designed for construction, fabrication, manufacturing and plant applications, it also allows the operator to increase or decrease machine parameters in increments from one to five per cent, and preset the percentage of output of the machine before welding. 

“After switching to a wireless remote control we concluded that we were shaving three minutes off the cycle time. If you’re making ten trikes each day, now you are saving 30 minutes—that’s one more trike I can build each day.”

—Paulo Camasmie, owner, Big Cat Human Powered Vehicles

“The Wireless Remote Hand Control’s digital display allows me to have complete control of the molten puddle and know exactly what my settings are. It makes welding much easier for me and my helper”

—Garry Allison, pipeline welder, Local Union 798

“We’ve always kept two spares, but there were times when we’d go through both of them and damage a third within a couple of days. Overall lifespan of a pedal in my shop is four months (because of the damage done to the cord). If we went through three a year, that’s $720 in pedals per machine.”

—Rick Arnold, owner, RAFAB Specialty Fabrication

Miller

Similar Articles

Multi-process welding system

ESAB's new Rebel EMP 215ic is a 120V-230V CC/VC welding system the company says offers true multi-process arc performance.

Aluminum MIG push-pull welding systems

Lincoln Electric has introduced two new aluminum MIG push-pull welding system packages, the Power MIG 350MP and One-Pak.

Higher productivity welding in heavy fab applications

Flex Feed 84 is Lincoln Electric's latest additon to its line of wire feeders. The company says it delivers consistent feeding over long conduit runs iwth large diameter wires up to 2.4 mm (3/32 in.).

Robotic nozzle cleaning station cuts costs

Tregaskiss has introduced the Tough Gun TT3E Reamer, a robotic nozzle cleaning station with digital Ethernet communications to better integrate into companies' digital controls infrastructure.

Chromium-free hardfacing wire

Eutectic has introduced what it says is the hardest wire with no hazardous chromium by-products, BoroTec 600 Cr-Free.

Stay In Touch

twitter facebook linkedIn