Our Improved Heavy-Duty Construction Cutting Machine

The MPC2000 MC is a highly flexible, multi-process Messer cutting machine that can be equipped with multiple carriages for up to five separate processes including precision plasma, Oxyfuel, drilling up to 2.5”, milling, and markers, with the ability to install up to 4 tool stations.

This plasma cutter delivers clean, smooth cut part edges and precise cut holes, all with high accuracy and repeatability. The MPC2000 MC includes linear motion ways, and state-of-the-art AC servo drives provide dependable machine tool performance.

The drilling and milling high-suction chip vacuum system allows for a cleaner table surface and work area. This system prevents chips from flying off the surface table for operator safety and height-sensing accuracy. There is also a collection hopper for recycling steel chips.

Integrating the MPC2000 MC will improve your plate processing in a number of ways. Built for heavy-duty structural steel processing, in applications like truck manufacturing and tank cutting, this machine is the perfect fit for multiple types of industries such as steel service centers, shipbuilding, the rail industry, oil and gas, construction, mining, and big agriculture.

BENEFITS OF USING THE MPC2000 MC CUTTING MACHINE

Integrating the MPC2000 MC will improve your plate processing in a number of ways.

Standard Machine Features

When you purchase an MPC2000 MC, you’ll gain access to the following features and capabilities:

  • Materials processed: Mild Steel, Structural Steel, Stainless Steel, and Aluminum.
  • Material thickness capacity: 26 ga. to 8″ (203.2mm) dependent on process.
  • Cutting width: 12′ (3.657m) to 28′ (8.534m).
  • Cutting length: up to 200′ (60.69m).
  • Drilling up to 2.5″ (63.5mm) diameter.
  • Tapping up to 1 1/2″ (38.1mm) diameter.
  • Milling functionality.
  • Beveling curves functionality.
  • Contouring speeds up to 400 ipm and positioning speeds up to 1400 ipm.
  • Enhanced linear motion ways and state-of-the-art AC servo drives.
  • Long-life band drives.
  • Larger end trucks.
  • High suction chip collection vacuum system.  
  • Easy-to-use GlobalControlPlus touch screen interface.

Optional Machine Features

With a dynamic construction  your MPC2000 MC may be customized to your needs with the following options, as well:

  • Plasma up to 800 Amps.
  • Up to four plasma torches, two markers, and four oxy-fuel torches.
  • Plasma beveling units Global Rotator Infinity, Delta E, Manual Plasma Stripping Bevel Unit for the X-Axis.
  • Oxyfuel Bevel Cutters: DAF/L, Single Position Bevel Unit, Three Position Bevel Unit, Oxyfuel Contour Bevel Unit.
  • Plate markers: Air Scribe, Zinc Powder, Ink-Jet, and Telesis Pinstamp®. 
  • Zoned exhaust tables, such as the self-cleaning Slagger®
  • Programming and nesting software.
  • Operators riding platform. 
  •  Glare curtains. 

See the components section for additional add-ons.

Software

OmniWin is a simple, clear, fast designing and nesting software that can be adapted to the MPC2000 MC for cutting and drilling. It processes cutting tasks for order-based production runs as well as in just-in-time manufacturing, with changing quantities of custom cutting operations. You save time, materials, and it is easy-to-use. OmniWin is the ideal tool for oxyfuel, plasma, drilling, and milling.

High Accuracy and Repeatability

Achieve accurate results across applications by programming your machine for your specific purposes, reducing the risk of costly errors.

Consistent performance and repeatable results are critical for maintaining efficient production, and this machine allows you to consistently complete various functions at the same high standard.

Design and Durability

The heavy-duty, rugged beam design gives this machine a construction tough enough to keep cutting even through three shifts and offers the strength and stability for maximum accuracy and repeatability.

Designed and manufactured in the USA to meet machine tool and ISO 230-2 standards, both UL/cUL.

Usability

The MPC2000 MC is equipped with Global ControlPlus for an easy-to-use operator interface. As with other Messer machines, you will gain access to our Virtual Service and Visual Service remote consultation and diagnostics, as well as our Sentry Service preventative maintenance program to keep your machine in working condition.

You will also benefit from installation flexibility with right, left, or overhead powertrack options.  Also an optional operator riding platform and operator glare curtain for enhanced safety and efficiency.

Machining Capabilities of the Improved MPC2000 MC

We can equip your MPC2000 MC with carriages to perform up a variety of functions.

Precision Plasma Cutting


For fast, accurate, high-quality cuts, the MPC2000 MC performs well as a plasma cutting table. We offer precision plasma cutting capabilities up to 800 amps on this machine. With precision plasma the lifter equipped on this machine is the PL-1 Plasma Torch Lifter with the SureStop Collision Sensor.

Oxyfuel Cutting


Oxyfuel provides consistent piercing and faster cutting results. With options for auto torch spacing, automated gas regulation, automatic height control, MPC2000 MC can achieve repeatable high standards through precision technology. This machine can be equipped with multiple torches ALFA or Turbo Flame™.

Drilling and Milling


The MD250 Drill Unit offers a 24 tool rotary drill tool changers, allowing for automatic tool replacement for faster drilling. Using the enhanced machining process allows the ability to drill up to 2.5 inch diameter on 6” thick mild steel and, tap 1.5” 6 unc for the 2.5’ drill or milling critical internal features.

Marking


When you need to mark stainless steel, mild steel or aluminum, choosing the right marking tool for the MPC2000 MC can help your company save time by cutting and marking on the same piece part. Marking equipment can easily and precisely create durable marks for long lasting legibility and permanency.

Markers:

  • Inkjet Marker
  • Powder
  • Telesis Pinstamp.

Curve Bevel Cutting


When bevel cutting thicker plates, Oxyfuel is best for over 3”. This method is economical, accurate, and precise, granting you more control over the process.

If you are working with plates that are up to three inches thick, plasma bevel cutting is the only way to go. With plasma beveler cutters, the Delta E or the Global Rotator Infinity can cut angles K,V, X, Y, I with max bevel angles +45° to -45°.

 

Chip Vacuum Extraction and Collection


When cutting, drilling, milling, or marking plates, you will typically create “chips” of material that can accumulate on the workstation. The MPC2000 MC has built-in chip vacuum extraction and collection features to keep your work surface clean and clear. There is a collection hopper for recycling steel chips. A dust collector is required for chip collection.

 

Cutting Tables

The Slagger®

The Slagger® cutting table is like no other in its ability to move slag. Whether produced from oxyfuel or plasma cutting, the slag moves from one side of the table and deposits the slag into a collection bucket at the end of the table in just minutes.

Table Sizes Available:

  • Widths from 6′ to 24′ (1.8288m to 7.3152m).
  • Lengths from 10′ to 200′ (3.048m to 60.96m).

Shuttle Tables

Our shuttle burn table will enhance productivity at your business by enabling fast and easy production as well as the flexibility that is simply not possible using other plate cutting systems. Combined with Intelligent Cutting™ software solutions for Material Handling and Industry 4.0 digitization advancements, your facility will greatly benefit from harnessing the power of the whole value chain.

Shuttle Pallets Key Features

Save time by using the shortest path for material loading and unloading in material handling applications. Plate loading and unloading take place at one end of the machine and at a common height for the operator to work freely without interfering with cutting operations or machine movement. Two burn pallets load one plate or remove parts while another is cutting without interruption.

  • Plate capacity: 6, 8, and 10-foot widths.
  • Plate lengths: 10 to 25 feet, offered in 5-foot increments.
  • Two plate thickness capacities: ¾ inch up to 2 inches.

Slat Trays for Drilling

A slat tray assembly is a fabricated structure that holds the slats and allows them to be replaced quickly in modules rather than individually. Drawings are available for users to make replacements. Optional designs include standard slats for drilling applications.

COMPONENTS

Contact

Messer Cutting Systems, Inc.


W141 N9427 Fountain Blvd.
Menomonee Falls, WI 53051
USA

 

+1 262-255-5520
+1 262-255-5170
Contact Us

Downloads

MPC2000 MC


ALFA

The Messer Cutting Systems developed ALFA oxy-fuel torch takes oxy-fuel cutting to an entirely new level. The ALFA torch internalizes many features that used to have to be on the outside of an oxy-fuel torch, including height sensing and auto-ignition.

More

MS 832/Turbo Torch

Our Turbo Flame™ Torch is very versatile, able to be used with a variety of fuel gases and is very safe to operate.

More

FT100 Torch Ignitor

Messer Cutting Systems FT100 Torch Ignitor remotely ignites any brand of oxyfuel torch. Since no arc is struck, critical alignment is not needed allowing for easy and fast tip change out.

More

Omniflow Automatic Gas Control System

The Omniflow Automatic Gas Control System delivers automatic setting and regulation of preheat oxygen, cutting oxygen and fuel gas pressure during oxyfuel cutting.

More

Parallel cutting

DAF/L

The automatic infinitely rotating triple bevel head D/AFL is created for V, X, Y and K cuts.

More

Single Position Oxyfuel Bevel Unit

Manually adjusted Single Position Triple Torch Oxy-fuel Bevel Unit for straight line bevels with manual ignition and gas adjustment.

More

Three Position Oxyfuel Bevel Unit

Manually adjusted Triple Torch Oxyfuel Bevel Unit for straight line bevels with manual gas adjustment and manual ignition.

More

Oxyfuel Contour Bevel Unit

The Oxy-fuel Contour Bevel Unit provides continuous bevel cuts in mild steel with automatic contour control, manual ignition and bevel angle adjustment.

More

Straight Line Plasma cutting Messer

Straight Line Plasma Cutting

Our products cover the whole range of cutting tasks in modern metal industries. Using different thermal cutting technologies for straight plasma cutting, our machines can be easily adapted to your shop’s requirements.

More

Infinity Rotator

This heavy-duty Skew Rotator Infinity continuous rotation is capable of accurately cutting bevel profiles (non-vertical) on nearly any contour.

More

Global Rotator Delta e

Robust compact design, coupled with our OmniBevel software, creates the best plasma bevel cut parts.

More

Manual Plasma Stripping Bevel Unit

Messer Cutting Systems’ Manual Plasma Bevel Unit provides an adapter mounting between the SureStop breakaway and the lifter. This component enables straight-line motion bevel cutting in the X-axis.

More

Drilling

Drills up to 2.5" diameter on 6" thick mild steel and taps up to 1 ½". Add an optional chip recovery system for cleaning.

More

airscribe from Messer

Air Scribe

The Air Scribe marker uses a reciprocating pin to mark on mild steel, stainless steel, and aluminum plate. The marker can be used with any plate thickness.

More

Powder Marking

Produces lines and text using zinc powder. Learn More.

More

Inkjet marking from Messer

Ink-Jet

Ink-jet marking delivers fast and quiet alphanumeric labeling with printing in one direction of travel for non-rotational unit or multi-directional with rotating unit.

More

Plasma marker from Messer Cutting

Plasma Marking

Plasma marking is suitable for the engraving of lines, contours and characters on plate surfaces.

More

Telesis Pinstamp from Messer

Telesis Pinstamp

The Telesis® Pinstamp® marking system uses a reciprocating stylus permanently prints messages on to a variety of plate such as mild steel, stainless steel, and aluminum.

More

SL200, SL-300 Oxyfuel SmartLifter

The SL200 PLASMA AND OXYFUEL SMARTLIFTERS include several productivity enhancing features to produce more parts in a shorter period of time. An adaptive initial height sense system “learns” the height of the plate on the cutting table to quickly position the torch to the correct pierce height.

More

PL-1 Lifter with Surestop Collision Sensor

Messer Cutting Systems’ PL-1 Plasma Torch Lifter combines plasma arc voltage monitoring with a CNC closed-loop positioning axis to significantly enhance plasma height control in plasma cutting. This enhanced height control results in a higher duty cycle and better cut quality. The Surestop Collision sensor for fast and easy torch reset.

More

SensoMat®-PAN

SensoMat®-PAN Height Sensing for oxyfuel reliably maintains the proper standoff distance between the oxyfuel torch tip and the work piece, without operator intervention.

More

Laser Pointer

Our Laser Pointer enables the operator to identify the edge or other feature of the plate physically with a known location on the cutting machine, simplifying the basic setting, shortening throughput times and avoiding scrap.

More

Digital Video Camera

Monitor the cutting process with Messer Cutting Systems’ Digital Video Camera. This product assists in remote diagnostics using Virtual Service™ and gives your team the benefit of having a bird’s-eye view of the cutting process.

More

Video Camera Manual Plate Alignment

Monitor the cutting process with a Video Camera for Manual Plate Alignment. The image is conveniently displayed on the 24" TFT color screen of the Global Control Plus.

More

Glare Curtains

Glare Curtains for operator safety and plasma cutting spatter protection.

More

Plasma Air Booster

Plasma Air Booster

Plasma air booster is a low cost alternative to an expensive air compressor. Available for all machines with a plasma system.150 PSI per CFM.

More

Dual Hi-Lo

Dual Hi-Lo Manual Gas Control System is an economical gas control solution for oxy-fuel.

More

The slagger

Slagger

The Slagger® cutting table is like no other in its ability to move slag. Whether produced from oxyfuel or plasma cutting, slag moves from one side of the table and deposits the slag into a collection bucket at the end of the table in just minutes.

More

burn table

Downdraft Table

The downdraft cutting table is like no other cutting table anywhere. The downdraft is specially designed to work with smaller machines and has a maximum plate capacity of 3" thick plate.

More

Messer Cutting | Donaldson Torit Dust Collector

Camfil APC

Camfil APC is one of the top dust collector manufacturers worldwide with over 50 years of experience. Their dust collectors are specially engineered and designed with cutting machines in mind.

More

Messer Cutting | Donaldson Torit Dust Collector

Donaldson Torit

Donaldson provides filtration systems and replacement parts. Since 1915, Donaldson has developed its innovative technology, built strong customer relationships, and developed a broad geographic presence. Today they offer some of the highest quality dust collectors on the market.

More

Global Control Plus

Easy-to-use, feature rich, Windows® interface. The Global Control Plus has a 24” touch screen with multiple process databases. A few of the key features include custom shape library, true shape nesting and productivity monitoring. Remote diagnostics and applications support is available with a push of a button.

More

OmniWin

MesserSoft OmniWin software is a simple, clear and fast designing and nesting software developed by MesserSoft. This software specially created for Messer machines, adapts intelligently, taking over cutting tasks for order-based production with additional CNC thermal cutting machines.

More

OmniBevel

OmniBevel is the professional software product for bevel cutting. It represents straight cuts, cylindrical holes, exact bevel angles and parts with absolute dimensional accuracy.

More

Customer Service

With 360° Messer Service we offer you five-star service programs ensuring your machine productivity and longevity.   An important part of your business success is …

More

360 service icons

Maintenance

Purchase Preventative Maintenance and receive 30% savings on labor rates from a certified Messer technician. Plus 10% off on all related parts purchases;  Plus 50% …

More

Virtual Service

Messer Cutting System offers the Virtual Service™ program in support of our complete line of cutting machines. This unique package allows our team of experts …

More

Training

In times of increasing competitive pressure, it is only logical to invest in the expertise and competence of your employees. After all, not only should …

More

Application

We see ourselves as customer oriented and innovative consultants. We to want help you open up new horizons of productivity to exceed your current demands …

More

Spare Parts & Consumables

Ensure optimum productivity for your systems by using original spare parts and consumables. We have current spare parts and consumables available for you with fast …

More