New approach and and clearance angles improve Walter’s Xtra·tec XT M5130 shoulder milling cutter Click image to enlargeWalter’s Xtra·tec XT M5130 shoulder milling cutter now offers greater penetration depth and increased reinforcement.

Many of the design features focus on making the tool body more productive by increasing the strength. In addition, it also features a new mounting position for the inserts and 17 per cent more teeth.

These enhancements, including a new clearance angle of 7°, helps the tooling handle a wide array of machining operations, including face, shoulder, ramping and pocket milling, as well as circular interpolation.

This versatile mill is well suited to machining steel, stainless steel, cast iron, non-ferrous material and materials with difficult cutting properties.

The wide range of applications results in lower tooling and administrative costs, as its 90° approach angle dramatically decreases the need for finishing operations.

The M5130 features two pitches for different applications, and a stable cross section due to the modified installation position of the indexable inserts. Available in diameters of 0.5-6.0 in. (10-160 mm), and geometries: F55, G55, K55 and M85.

www.walter-tools.com/us

Fully automatic NC circular cold saw

KAAST Machine Tools has added a new Fully Automatic NC cold saw to its line of circular saws.

Voice control for bending

Bystronic has expanded its ByVision Bending user interface with voice control.

Intuitive display unit for linear scales

Mitutoyo Canada Inc.'s new KA-200 Counter is an updated display unit for linear scales with new features and functions that make it a good addition to manual machine retrofit packages, says the company.

Virtual welding simulators

Lincoln Electric has launched its new VRTEX virtual reality welding training simulators.

Fast changeover between gun drilling and BTA

UNISIG has added a new machine to its UNI series of deep hole drilling machines: the UNI-50BTA. The machine allows operators to change quickly from BTA to gun drill deep hole drilling tooling.

Higher deposition rates with metal-cored wire

The FabCOR F6 metal-cored wire from Hobart provides higher deposition rates and faster travel speeds than solid wires to help increase productivity on single-pass, flat and horizontal welding applications.

Portable plug and play dust collector

For easy dust collection at multiple sources throughout the plant, Camfil APC offers the Zephyr III Portable Dust Collector.

Bandsaw with increased cutting output

The new Behringer HBE Dynamic Series bandsaws use a high torque, frequency controlled blade drive motor. The specialized gearing in the drive is engineered to produce the blade power and speed needed to achieve fast cutting and peak throughput rates. Because the drive is low horsepower and energy efficient, power consumption is reduced while energy savings and high production are realized. The new saw is designed to meet a broad range of applications in the steel trade, mechanical engineering, tool making and in high-end metalworking shops.

Electronic weld head for miniature parts welding

Amada Miyachi America Inc.'s Series 300 electronic weld head offers a controlled weld force profile ideal for miniature parts welding.

Robotic welding for structural steel fabrication

The BeamMaster WELD robotic welding line from AGT Robotics is specially engineered for structural steel applications.

Weld mask designed for use in tight spaces

Miller Electric Mfg.  is expanding its Weld-Mask series with the introduction of Weld-Mask 2, an alternative to traditional welding helmets for the industrial welding market.

Better welding performance for sub arc apps

ESAB Welding and Cutting Products’s new Aristo 1000 AC/DC power source for sub arc welding is an inverter power source that can be connected to three-phase input voltage supply (from 380 to 575V at 50 or 60 Hz).

Roughness sensor enables use of CMMs for surface inspection

The new Zeiss Rotos roughness sensor enables the use of coordinate measuring machines to completely inspect surface waviness and roughness – even on complex workpieces, and all in a single measurement run without any reclamping.

All in one fabricator’s kit

Hougen Manufacturing has released the HMD2MT Fabricator’s Kit, a new portable magnetic drill kit.

Finish internal and external grooves

Horn USA has released its FB geometry, a solution for finishing internal and external grooves.

Stay In Touch

twitter facebook linkedIn