Prod 1 Iscar Main image Fig. 1. MULTI MASTER HeadsClick image to enlarge

by Andrei Petrilin, Iscar technical manager

Manufacturing's push towards comprehensive digitizing will impact almost all stages: product design, process planning, machining, assembly and logistics. The driving force behind the changes is a series of technological breakthroughs related to Industry 4.0.

With the use of network communication, new digital technologies combine physical manufacturing systems with the virtual world and 3D modelling. As manufacturing systems continuously improve their intellectual features and decision-making capabilities, they become more complicated and more expensive.

Minimizing the downtime of such systems is important for the development of every system component, such as machine tools, workholding devices or cutting tools. Cutting tools can not only cut metal but also cut downtime, depending on their design.

Assembled cutting tools with exchangeable cutting heads from cemented carbides are very common in metalworking today. Two decades ago there were very few systems built on an exchangeable head principle. Now practically every leading cutting tool manufacturer has this type of system in its product range.

Advances in tool grinding and resharpening machines have simplified production of solid carbide tools and their regrinding. This has increased the number of small and medium-sized tool manufacturers, and a growth of regrinding services. It might have been expected that the solid carbide design approach would seriously challenge the exchangeable alternative and quickly regain lost ground. However, this has not happened—indeed, the situation is reversed. Progress in machine tool engineering and the current trend towards smart manufacturing hold good promise for the future of assembled cutting tools with exchangeable heads.

Prod 1 Iscar 2nd image Fig. 2 SUMOCHAM DrillsClick image to enlargeAn example of this contrast is cutting tool manufacturer ISCAR, which introduced the "no setup" principle in tools with exchangeable heads without removing a tool from the machine. The source of this "no setup" feature is high repeatability of the exchangeable heads that is ensured by a face contact between the head and a tool body, and strict tolerance limits for the head area protruding over the body. The "no setup" principle was successfully realized in Iscar's Multi-Master and Sumocham rotating tool lines.

In non-rotating products, the new Multi-Grip and Logiq-5-Grip parting and grooving tools represent a different approach, where the assembled tool comprises a tool block and an indexable multi-pocket adapter carrying replaceable inserts. Due to the high precision of the assembly components, the pocket indexing does not require additional setup. Both "no setup" concepts provide significant reductions in machine downtime.

These tools also offer exceptional versatility. The Multi-Master is suitable for mounting in different tool bodies, and the body can carry different heads, enabling thousands of tool combinations for a broad range of applications including milling shoulders, faces, slots or complex surfaces and machining holes or chamfers.

Multi-F-Grip non-rotating tool blocks and four-pocket adapters integrate both Tang and Do-Grip inserts. Versatility was once considered the main advantage of tools with exchangeable heads. However, recent progress in machine tool engineering and the trend towards smart manufacturing based on Industry 4.0 concepts, "no setup" capabilities have reemerged.

Prod 1 Iscar 3rd image Fig. 3. MULTI F GRIP ToolsClick image to enlargeAdvanced regrinding now allows restoration of cutting geometry of a worn solid carbide tool with high accuracy. However, the tool changes dimensions slightly and putting it into operation demands preliminary setup and appropriate corrections in a CNC program. This causes a reduction in effective uptime, diminishing productivity and increasing production costs.

However, a "no setup" quick-change cutting head eliminates these supplemental measurements and corrections, and does not require any additional setup. This is why the "no setup" capability of a cutting tool plays a significant role in a smart metalworking factory. From this point of view, "no setup" assembled tools with exchangeable carbide heads, such as Multi-Master and Sumocham, are a good match for a smart factory. Understanding the benefits of this capability makes it clear why ISCAR considered tough tolerance limits for the overhang as an essential design requirement when the company started development of these two lines almost twenty years ago.

Prod 1 Iscar 4th image Fig. 4. MULTI MASTER Tools in multifunction machine tool postClick image to enlargeA further advantage of using tools with exchangeable heads is custom tool configuration according for machining a specific part. Machines that handle various types of cutting in one single-step process have become very popular. These machines have driven-tool capabilities for combining machining by rotating and non-rotating tools, which can significantly improve productivity. The power characteristics of a typical driven-tool unit are similar to the parameters of a typical small machining center. The Mulit-Master line features a wide variety of tool bodies (“shanks”)  with different adaptations, reducers and extensions, which ensure an optimum configuration and minimize tool overhang, reducing the bending load on the driven tool unit mechanism to improve performance and tool life.

Iscar Tools

iWire function adapts wire speed to changing conditions

The new iWire function from GF Machining Solutions automatically identifies and adapts wire speed to changing erosion height conditions during the wire EDM process.

Carbide step drill program, new Drill-Chamfer tools

A new carbide step drill program was launched by Emuge Corp.

New B axis milling head with 250° swivel range

DMG MORI has introduced its 4th generation DMC 80 U duoBlock and DMC 80 FD duoBlock universal machine centres that feature a new B axis milling head with an extended swivel range of 250° with a swivel of 70° in the negative direction.

Mazak gets connected

First machine tool OEM to adopt MT Connect at its US manufacturing facility

Mazak Corp., Florence, KY, has become the first machine tool OEM to adopt a open communications protocol MT Connect at its manufacturing facility.

Live tooling

by Preben Hansen

Consider your options if working with driven tools

Five axis vertical machining

The D800Z is the newest addition to Makino's family of five axis vertical machining centres. It offers easy access to the spindle and table, a highly rigid structure for responsive cutting, outstanding surface finishes, according to Makino, and optional automation devices. Workpieces of up to 1,000 mm in diameter and 1,200 kg in weight can be machined in five axes, with great efficiency and fewer operations for reduced production time, claims the company.

New compact stationary belt grinder

Fein Canada has introduced the GKS 75 EF compact stationary belt grinder, which features a small footprint making it ideal for repair shop applications.

Faster holemaking

The problem
Slow cutting speeds for large holemaking in ferrous metals

Machinery evaluation program

Fives Group has introduced a new machinery evaluation program to assess machine tools.

Spin technology for more consistent welds

Abicor Binzel's new ABIMIG SpinArc is designed to create a more consistent weld, claims the company.

Xtra·tec XT M5460 profile milling cutter

Walter has introduced the Xtra·tec XT M5460, a new profile milling cutter for precision machining of freeform surfaces and deep cavities.

Automation options for large format fiber lasers

LVD Strippit has introduced new automation offerings for its Phoenix FL 4020 and Phoenix FL 6020 large format fiber laser cutting machines.

More is Better

Are two-axis lathes going the way of the dinosaurs? Maybe not, but here are some reasons why turn-mill, multitasking, and Swiss-style turning centres are often a better investment.

Eliminate secondary bends

Wilson Tool International has developed Opti-Bend tooling for punch press operations that gives fabricators the ability to create bends up to 90° on the punch press to eliminate the need for secondary operations at the press brake.

Flexible, versatile turning

Doosan Machine Tools has updated its Lynx turning centres with the 2600SY.

Stay In Touch

twitter facebook linkedIn