Iscar fig.2Click image to enlarge

Cemented carbide indexable inserts are an integral part of cutting tools today. Progress on manufacturing technology and design methods has led to important breakthroughs in the production of indexable inserts, says Iscar in this white paper.

Cemented carbide inserts were introduced in the early '60s and have substantially changed tool designs, putting tools with brazed carbide tips on the back burner. Mechanical clamping of the indexable inserts provided significant advantages in productivity, efficient use of carbide and tool maintenance.

Advances in technology and metallurgy have facilitated the development of indexable inserts that are far more advanced than their predecessors, and complicated shapes which have replaced the simple forms that characterized inserts in the past.

The shape of an insert is a key factor for cutting geometry of a tool as a whole. For example, when milling, geometry variation by means of changing the position of the insert in the tool is very limited, and the results are far from optimal. Effective machining demands constant rake and relief angles along the cutting edge, which in turn necessitate complicated contours of the top of the insert (and also bottom for double-sided inserts) and its periphery. A land that strengthens the cutting edge and a minor edge for better milling by ramping further increases the design's complexity.

The insert must ensure precise control of the flow of chips produced by the cutting action, and so the chip breaker on the rake face adjoining the cutting edge must be specifically shaped. This is particularly important for turning, especially if a machined material produces long chips; here, the chip breaker controls the direction of the chip flow so that the chip overturns and breaks into smaller segments.

Finding the optimal insert shape for efficient cutting and chip control is not a simple task, and tool manufacturers have leveraged new technologies to develop successful solutions.

The indexable inserts are sintered products.

Integrating dedicated automated and computer controlled systems into the tool fabrication facilities ensured both stability and repeatability in the powder metallurgy processes. As a result, pressing complicated forms became possible without fear of cracks, and a technological base for forming challenging geometries of inserts was developed.

A surface that ensures satisfactory chip control, particularly chip breaking, is a combination of concave and convex elements: grooves, bosses, etc. Manufacturing this surface by grinding is both very limited and expensive. This is one of the main reasons why the first generations of the indexable inserts featured flat forms. In contrast, with the use of powder metallurgy the rake face of an insert can be configured as desired.

Today, cutting tool design engineers have at their disposal advanced working tools such as computer-aided design (CAD) and modeling, which have essentially changed the process of insert development. The new methods have opened up the possibility of simulating various processes, such as chip formation and chip flow. Consequently, an optimal geometry may be designed on a computer by changing various parameters of the virtual insert.

Progress on both fronts - manufacturing technology and design methods - has led to important breakthroughs in the production of indexable inserts.

Iscar’s insert IQ845 SYHU 0704 for face milling cutters is a good example of how computer modeling and advanced pressing have resulted in a successful product (Fig. 1).

Iscar's IQ!845 SYHU 0704 0704 insert for face miller cuttersClick image to enlarge

Computer modeling the chip flow has contributed significantly to optimizing the rake face shape for the family of ISCAR inserts CNMG-F3M (Fig. 2, 3) that was designed especially for the finish turning of ISO M materials (austenitic, precipitation hardening and duplex stainless steels).

Iscar's CNMG-F3M inserts for finish turning of ISO M materialsClick image to enlarge

Iscar's CNMG-F3M inserts for finish turning of ISO M materialsClick image to enlarge

Powder metallurgy is applied to the face of the insert as well as its cutting edge. For example, the inserts P290 ACKT of the ISCAR MILLSHRED family possess serrated cutting edges (Fig. 4) that are used as sintered. The serrated cutting edge shreds the chip and so greatly improves milling results in unstable conditions.

P290 ACKT inserts of the Iscar MillShred family with serrated cutting edgesClick image to enlarge

The concept of a cutting tool with mechanically-clamped inserts pushed aside brazed cutting edge applications once the industry learned to produce sintered inserts with acceptable accuracy and dimensional stability. However, for high-precision cutting, rotating solid carbide and also brazed tools still retain the lead. A one-piece integral cutter, ground with strict tolerance limits, always has the advantage in accuracy in comparison with an assembled tool with inserts. There is a viable indexable alternative that not only overcomes the lack of accuracy but improves the tool by making it both versatile and economical: an innovative yet simple modular cutter that can incorporate various replaceable solid carbide heads.

Iscar's tool families target different types of machining: Multi-Master (milling and drilling); T-Slot (milling slots and grooves); SumoCham, ChamIQDrill and ChamDrill (drilling); Bayo T-Ream(reaming). Manufacturing replaceable heads for the tools is based on technologically-advanced pressing and sintering processes. There are two kinds of heads. One is a tool of decreased length usually made of solid carbide, whereas the second head features a specific pre-sintered shape that is brought to final dimensions by fine grinding. Advances in powder metallurgy have influenced the second type of head, while technological progress has succeeded in producing highly specific shapes for improved cutting action and chip control that are very difficult or even simply impossible to reach by using grinding operations (Fig. 5).

Iscar's tool families target different types of machining. Click image to enlarge

The growth of modern technology opened the door for producing both the indexable inserts and the replaceable heads from cemented carbide in diverse shapes. This reflects the outcome of years of research and development in the field, and further illustrates Iscar' s commitment to the development of machining performance. Essentially, an indexable cutting tool comprises only three components: the tool body, the inserts (the insert) or the head, and a clamping element.

The carefully shaped cutting area of this modern tool removes material directly despite its small dimension and uniform structure. Iscar's research and development division is committed to the evolution of smart cutting tool solutions and technologies to improve production processes in metal cutting.

Going custom?

by Kip Hanson

Improve machining efficiency and cut costs with specialty tooling

Dual beam gantry cutting machine

The TMC4500 DB is the largest machine in Messer's line of thermal cutting gantry machines. Built with a heavy duty dual box-beam, the machine is supported by 10 ft ( m) endtrucks for great stability.

"World's smallest push-pull robotic welding torch"

Fronius has launched what it says the world's smallest push-pull robotic welding torch, the Robacta Drive TPS/i.

Nick Tomac joins Tungaloy Ontario team

Nick Tomac is the new sales representative for Tungaloy in Canada for the Kitchener, Waterloo, Cambridge and Guelph, ON, areas. A tool and die maker with more than 15 years of experience, he also holds a diploma in manufacturing engineering.

Tungaloy 

Automotive tooling solutions

Iscar Tools spotlights tooling advances for the automotive manufacturing industry

Constantly changing factors such as unstable oil prices, ever more demanding environmental protection legislations and the evolution of more efficient technologies ensures a continually changing global automotive market place. These factors also increase the ongoing competition between carmakers and OEMs and dictate today's automotive industry manufacturing trends.

Roughing and finishing stainless with one milling tool

Fast and reliable milling of stainless steel, titanium, heat resistant alloys or even CrCo- alloys is a big challenge for many manufacturers and Mikron Tool has launched CrazyMill Cool a product family that promises a solution in a diameter range from 0.3 mm (.012 in.) to 8 mm (.315 in.), claims the company.

High speed electronic weld head for miniature parts welding

Amada Miyachi America Inc.'s new Series 300 electronic weld head offers the precisely controlled weld force profile ideal for miniature parts welding, according to the company. Originally released more than twenty years ago, there are more than 1000 Series 300 electronic weld heads in use all over the world, with more than half going into operation in the last decade.

CAD/CAM software for multi axis precision laser systems

Prima Power Laserdyne has released FastTrim CAD/CAM software for use with its multi axis precision laser processing systems.

Faster holemaking

The GEN3SYS XT drilling line from Allied Machine & Engineering offers increased tool life and productivity in high penetration rate drilling applications, according to the company.

New dressing concept on cylindrical grinders

United Grinding has added three new radius internal cylindrical grinding machines to its line of Studer internal cylindrical grinding machines: the S121, S131 and S141.

Stay In Touch

twitter facebook linkedIn