Digi-Check Height Masters Click image to enlarge

The L.S. Starrett Co. has announced the introduction of its Digi-Check Height Masters with electronic digital readout.

The new Digi-Check No. 258 Series Height Masters combine the accuracy of Starrett-Webber Gage Blocks with a precision micrometer head and digital readout display.

Digi-Check Height Masters provide an ideal reference setting for checking bore gauges, inside micrometers, end measuring rods and other gages, and height measurement of parts.

The new Digi-Check Height Masters now have a large, easy to read electronic digital display providing instant readout to .0001" or 0.001 mm. In addition, a graduated satin chrome finished precision micrometer head with speeder knob for fast positioning provides staggered graduations reading to .0001" or 0.002 mm. Both the micrometer head and digital readout are directly in line with the operator’s vision. The Digi-Check gage’s housing within a heavily flanged frame and base featuring three-point hardened, ground and lapped bearing pads, contributes to an exceptional accuracy of +/- .0002" (+/- .005 mm) and makes the gauge highly stable. Gauge blocks are assembled in a free-standing system isolated from the frame, allowing the blocks to conform to the workpiece temperature. Accuracy is further enhanced via a one-piece micrometer spindle with hardened and stabilized measuring threads.

Both over and under heights on Digi-Check Height Masters can be checked directly from the gauge blocks in a single setting, and with reference surfaces on the top and bottom of each block, adjacent blocks are in the same plane. Readings can also be taken from either left, centre or right of the gauge block column. The column design also permits wringing a 1" block between two blocks in the column – convenient for setting and checking other gauges.

Starrett Digi-Check No. 258 Height Masters are offered in three ranges: .100” – 12.100” (254 – 30,73 cm), .100 – 18.100” (0.25 – 45.97 cm), or.100 – 24.100” (0.25 – 61.2 cm). Metric models are also offered in three ranges: 2 – 302 mm (0.08 – 11.89 in), 2 – 452 mm (0.08 – 17.8 in), or 2 – 602 mm (0.08 – 23.7 in). Gauges are furnished in finished, fitted wood cases.

Height Master accessories such as Starrett Reverse Reading Blocks and Riser Blocks are also available.

More uniform grip with jaw forming ring grips

The Dillon jaw forming ring is an easy-to-use tool that provides a more uniform grip on the workpiece, according to the company.

A welcome power cut

Article courtesy of Iscar

The quest to reduce levels of power consumption in the global metal cutting sector is not a new trend; today it has become an essential technical requirement.

Figure 1

Large diameter drills for the wind turbine industry

Iscar is expanding the CombiCham drill family by adding three drill diameters.

Accurately measure workholding grip force

Kitigawa NorthTech's Digital Grip Force Anaylizer software and kit measures workholding grip force for machine shops.

9 axis twin spindle mill/turn centre

The T8 Hybrid 9-axis twin spindle mill/turn centre from Quicktech combines a three axis power turret and a 360˚ B axis with a sub-spindle that features a four axis gang slide to enable complete machining of complex parts with a capacity of 38 tools.

Stay In Touch

twitter facebook linkedIn