RESIZED SMTCL New EHC125100Click image to enlarge

The EHC 125300 is a new horizontal turning centre from SMTCL with a swing over the head of 1,250 mm (49 in.).

It can handle parts up to 3 m (118 in.) in length, as well as shaft parts weighing up to 4,990 kg (11,000 lb). It comes standard with a 1,000 mm chuck, eight position turret, steady rest, hydraulic tailstock and a chip conveyor.

More uniform grip with jaw forming ring grips

The Dillon jaw forming ring is an easy-to-use tool that provides a more uniform grip on the workpiece, according to the company.

A welcome power cut

Article courtesy of Iscar

The quest to reduce levels of power consumption in the global metal cutting sector is not a new trend; today it has become an essential technical requirement.

Figure 1

Large diameter drills for the wind turbine industry

Iscar is expanding the CombiCham drill family by adding three drill diameters.

Accurately measure workholding grip force

Kitigawa NorthTech's Digital Grip Force Anaylizer software and kit measures workholding grip force for machine shops.

9 axis twin spindle mill/turn centre

The T8 Hybrid 9-axis twin spindle mill/turn centre from Quicktech combines a three axis power turret and a 360˚ B axis with a sub-spindle that features a four axis gang slide to enable complete machining of complex parts with a capacity of 38 tools.

Stay In Touch

twitter facebook linkedIn