Click image to enlarge

Alberta oil pump manufacturer embraces lean to cut machining costs

by Ed Robertson

While rising energy prices and changing market conditions worldwide have caused energy-related manufacturing to heat up a cyclical business, what’s approaching white-hot status in the oil and gas fields is getting the most out of existing wells. From shale-gas extraction on the natural gas side to limited supplies of lighter oils increasing the demand for heavier oils, OEMs and shops serving the energy field are seeing growth across many fronts.

Founded in 1989 with headquarters and main manufacturing in Calgary, AB, Kudu Industries Inc. supplies a critical component to heavy oil extraction, the progressing cavity pump (PCP). Heavy oils are heavy not only because they are more viscous than lighter oils, but also because bringing them to the surface involves lifting a high percentage of sand and other solids. This makes pumping it a challenge, particularly in deeper existing wells.

Robust in design and powerful in performance, progressing cavity pump hardware is capable of maintaining the tremendous pressures necessary to keep oil flowing while also resisting clogging problems that plague conventional pumping equipment. In general, PCPs can do the job for about one quarter the price of conventional equivalent, using only about half the power, cutting costs and saving energy in the energy field.

“The basic pump design hasn’t really changed that much in terms of steel, chrome, elastomer, and other materials,” says CEO and company co-founder Ray Mills. “What has changed is that a pump sold for much more when we founded the company as opposed to now, and the reason why includes how we’ve come to look at and apply lean manufacturing principles.”

Top of the World
Founded in part to serve a market need for PCP technology in Alberta’s medium-crude oil wells, Kudu’s business boomed for the better part of 10 years, until a collapse in the price of oil caused sales to follow suit in 1998. It was then that company management began working with the National Research Council and its Industrial Research Assistance Program to apply lean manufacturing principles to the company.

Note the reference that lean applies to the company and not strictly its manufacturing processes. “Lean is very important to us,” Mills says. “Hardware and software are important, but lean tells us how to properly look at acquiring and using knowledge. It helps us move from looking at production technology strictly in terms of machines or software to a broader definition of acquiring any tool we can use to help us improve.”

From a low point in the late 1990s, privately held Kudu Industries has grown to be the second-largest maker of progressing cavity pumps in the world. At 340 employees, the company also has manufacturing capability in Lloydminster, AB, and is in the midst of opening a manufacturing facility in Romania. Output is an average of 5000 pumps annually, along with related equipment such as driveheads and power units.

Mills credits lean manufacturing principles with helping Kudu focus on driving out waste and adding value, which included bringing more outsourced manufacturing capability in-house as a result of reducing in-process inventory and increasing shop floor space.

Mills also credits a close working relationship with Richmond, BC-based industrial equipment distributor Thomas Skinner & Son, calling the company’s expertise “crucial” in helping Kudu Industries stay abreast of productivity enhancements in everything from machine tools to tooling inserts. “They’re in our manufacturing facility once or twice a week,” Mills explains, adding that working with a company with broad Western Canada coverage means what works for other companies can possibly benefit Kudu and vice versa. “One thing that comes to mind is that they started us on tool management systems, the automated vending machines for inserts and other tools,” Mills says. “It gives us assurances that we can keep running in the face of tool breakage or other emergencies; it keeps much tighter control of expensive inserts and tooling, and it streamlines ordering and billing.”

Kudu acquires two or three pieces of new capital equipment a year, on average, and keeps them around five years to maximize resale value and minimize maintenance costs. New to the company is an Okuma MA-600 HB horizontal machining centre, a sister machine to an existing model at Kudu. The 26,000 kg (57,200 lb) workhorse features a 1,000 x 900 x 1,000 mm work area (39.37 x 35.43 x 39.37 in.), a 630 x 630 mm rotary pallet (24.80 x 24.80 in.), and a 50-taper spindle with 0.004 mm (0.000160 in.) positioning accuracy and 0.0015 mm (0.000059 in.) repeatable accuracy.SMT

Ed Robertson is a contributing editor and manufacturing journalist based in the Detroit,MI, area.

For more about on-machine verification, read about Renishaw's probe on the Okuma machine.

www.kudupump.com | www.okuma.com | www.thomasskinner.com

 

 

Pressure tactics

Is ultra-high pressure waterjet cutting right for you?

by Jim Barnes

Since its introduction in the early 1970s, waterjet cutting has seen steady increases in pressure. Conventional systems today typically run at 60,000 psi, and many users are adopting ultra-high pressure systems running at 90,000 psi and more. How much pressure is enough?

Dispelling the Myths

By Mary Scianna

There is probably no better time than now to automate your welding shop.

Nozzle changer benefits

by Stefan Colle

Set up your laser machine to reduce piercing times and increase throughput

Shop View: Can smart technology be stupid?

Wednesday, October 12 is a day that will stay with me for many years.

Why? It was the day Shop Metalworking Technology's web site was set to go live.

Prima Power’s new generation turret punch press Punch Genius

A new-generation turret punch press, the Punch Genius is a versatile system, which allows manual processing from either A- or B- side or automated production cell. New intelligent ram shortens tool changes and increases the number of normal and indexing tools in turret.

Gearing up for business

Opportunities for growth in resilient automotive industry 

by Tim Wilson

If there is a good news story in the midst of the present economic malaise–in which the US economy is stuck in neutral, and the European crisis trudges on–it is here in Canada where, despite a strong dollar, the automotive industry has shown remarkable resilience.

Talking Safety

Shop Metalworking Technology discusses welding safety with Dave Hisey

CNC crash fails

It’s a bit easier to watch when it’s not happening to you. Watch these classic confrontations between metal and machine.

Cost savings on abrasives: White Paper

Walter Surface Technologies has publsihed a white paper that illustrates how manufacturers can achieve cost savings with abrasives in metal finishing applications.

Job Shops Quebec - Consistent Growth

by Kip Hanson

Quebec job shop solves a big turning problem by switching to a different cutting tool provider

Cutting with Fiber Lasers

Most suppliers now offer fiber laser cutting technology, but are fabricators in Canada using it?

by Mary Scianna

Fiber laser cutting technology made a big splash back in 2010 when this editor first wrote about the technology.

A 2 for 1 deal

by Mary Scianna

Punch laser combination machine opens doors to new business

Elias Custom Metal Fabrication Ltd. in Vaughan, ON, has something all custom job shops should have to succeed: owners who consistently invest in technology to diversify and grow.

Inside the Space Factory

Airbus is putting advanced technologies to work in its satellite manufacturing operations.

Training for Canada's manufacturers

The work is there, the skilled workers are not

by Tim Wilson

There is good news for Canada’s manufacturing sector.

Building space stations

Want to build a space station? Here's what you need to know.

Stay In Touch

twitter facebook linkedIn