- December 31, 2014
CoroCut QD is a new generation of cutting tools from Sandvik Coromant for parting and grooving of larger diameter bars. The company says these new tools optimize cuts that require longer tool overhang.
OSG Canada has added two new tooling lines to its product offering.
The MIG/MAG Narrow gap technology from Cloos Robotic Welding for welding thick-walled component parts. In comparison to conventional weld seam preparation, the weld seam volume can be reduced by about 60 per cent, according to the company, reducing welding time and providing a saving potential with regard to the filler material, shielding gas and power consumption.
by Stefan Gruber
Avoid unsafe clamping issues
Joseph Tabri is the new president at Komet of Canada Tooling Solutions, Newmarket, ON.
by Kip Hanson | Images by Ron Ng
Custom hydraulic product manufacturer Hydra Dyne develops its own in-house solutions to everyday machining problems
This Hungary based autonomous vehicle company believes self driving cars can navigate with regular cameras.
Building on the proven design of the existing NC4 system, Renishaw has introduced an enhanced solution to satisfy the demands of the rapidly evolving manufacturing environment.
by Andrew Brooks
Canada’s mining industry has its ups and downs, but a positive value proposition will always bring work
Joey Warren, applications technician with Thomas Skinner, middle, with customers in front of the Haas VF-3 machine at the Calgary facility.
Thomas Skinner's recent Haas Factory Outlet DemoDay20 events at its Calgary, AB, and Winnipeg, MB, facilities on October 2 celebrated the two companies' 30 year partnership in Canada.
Iscar's three new chipformers for finishing medium and rough turning of steel: R3P, M3P and F3P. The chipbreakers are designed to decrease the volume of chips removed from the workpiece during the machining process for efficient chip removal.
For the grooving and parting off on lathes, the new TetraCut range of grooving and parting off toolholders with corresponding inserts are ideal for turned part manufacturers in the general machining and micro machining industries. It offers an economical advantage with four cutting edges while permitting simplistic operation on Swiss type sliding head lathes.
The Weld.com guys sure don't look like the type to pour over formulas on a white board, but don't let that beard fool you.
CGTech, a developer of CNC software for simulations, verification, optimization and analysis technology for the manufacturing industry, has joined Partners in THINC, a network of 40 indusry suppliers using a commom open architecture platform, PC-based THINC OSP control to bring innovative solutions to manufacturers.
By Karl Almquist, manager, Business Services at Sandvik Coromant
Recycling is part of our everyday lives. At home, recycling is done almost exclusively as our way of protecting the environment.
Makino's ready-to-use automation system needs little to no special engineering, delivering essential automation capabilities right out of the box.