Marlon Blandon is thread mills product manager with Emuge Corp. Click image to enlargeby Marlon Blandon

Are you really getting the best results from your taps? Avoid common mistakes.

One of the most common mistakes a machinist makes when tapping a hole is using the wrong size drill. Not intentionally of course, it is just that most machinists are using outdated charts designed back in the 1950’s when high speed drills were the norm.

To reduce the risk of thread failure, the design engineer was often cautious and specified high percentages of thread height in tapped holes. The percentage of thread values that older tap drill charts provide is higher than needed in most cases. Another reason why some tap drill charts are outdated is that most drills for producing tapped holes were high speed steel or cobalt when the charts were created. Many tap drill holes are now being created with high performance carbide drills and these carbide drills generate more accurate holes than high speed steel drills. High speed drills typically cut larger actual hole sizes than carbide drills.

Making the correct tap drill size choice will affect the machining operation. Many tool manufacturers suggest using a percentage of thread values between 60 and 70 per cent for most pre-drilling applications. By increasing the pre-drilled hole diameter, the machinist can increase the life of the tap by reducing the amount of force required to form the thread. It is important to realize thread strength is not directly proportional to per cent of thread. According to some, 100 per cent thread specification is only five per cent stronger than a 75 per cent thread specification, but requires three times the torque to produce. Tap life is greatly reduced in an effort to theoretically increase thread strength.

Tap drill card.Click image to enlargeAs an example, a 7/16-14 UNC cut thread is usually denoted as a letter “U” 9.3 mm (0.3680 in.) diameter drill on most older tap drill charts that equates to a 75 per cent value for percentage of thread, but a 9.4 mm (0.3701 in.) drill might be a better choice. The slightly larger drill diameter still provides a 73 per cent of thread value, which is more than acceptable. But that two per cent reduction in thread percentage will reduce torque on the cutting tool and increase tap tool life. As a general rule, the tougher the material, the less the percentage of thread required to meet design requirements. In some harder materials such as nickel alloys, stainless steel, and hardened steels, it is possible to tap with as little as a 50 per cent of thread value.

Roll form threads require tap drill sizes that are larger than those specified for cut taps. A 7/16-14 UNC roll form thread will require a 10.25 mm (0.4035 in.) drill size. Material is being displaced and formed instead of cut, requiring the pre-drilled hole to maintain the correct amount of material to be formed into the taps thread profile. Roll form tapping displaces metal from the hole walls to form the threads so cutting tap drill will leave too much material in the hole

Choosing the correct tap drill size for an internal threading application is not as simple as looking at an outdated tap drill size chart. Understanding how the values can affect the manufacturing process is an important consideration. SMT

Marlon Blandon is thread mills product manager with Emuge Corp.


The Additive Advantage

by Andrew Brooks

Additive manufacturing is still relatively new, but will it usher in a new Industrial Revolution?

Drive Time?

by Noelle Stapinsky

In the face of a global pandemic, the questions facing Canada’s automotive supply sector will shape the industry for years to come

Spindle fix

Maintenance, repair and rebuild tips for machine spindles

by Kevin Sekerak

Cutting Strategies that Fly

by Mary Scianna

Tips to help you succeed in aerospace machining

High performance: how does your shop gauge it?

by Chris McDonald

Determining what defines high performance cutting tools

Identify theft

In the movie “Identity Thief” actor Jason Bateman plays the role of a man whose identity is stolen by a con artist. 

Made to Measure

Metrology tools for your manufacturing operation

Learning to compete

by Mary Scianna

Technical schools' pivotal role in skilled trades training

Think the skilled trades shortage is a problem now with an estimated 20,000 to 30,000 open manufacturing jobs?

Parting-off techniques

CoroCut QD is a new generation of cutting tools from Sandvik Coromant for parting and grooving of larger diameter bars. The company says these new tools optimize cuts that require longer tool overhang.

Getting the order

by Tim Wilson

The dark art of job estimating brought to light

Ask someone how he estimates a job and you’ll likely get a wry smile, perhaps a wink.

Tooling Up for Automotive

by Kip Hanson

In response to lightweighting initiatives, cutting tool suppliers are tackling new materials, forming new partnerships

Think big

by Tim Wilson

Big part manufacturing opportunities abound in energy and resource sectors

The energy and resource sectors are crucial to Canada's economic well-being. No longer the “hewers of wood and drawers of water,” professionals in this area drive innovation throughout the supply chain, with specific expertise in manufacturing, transporting, and maintaining large and sophisticated technologies in remote locations.

Watch your language

by Mary Scianna

People working in English dominant countries like Canada and the US take language for granted.

Space: a new manufacturing frontier?

by Mary Scianna, Editor

Mining asteroids—rich in iron, nickel, rare platinum group metals and water—is a smart idea and one that may open the doors to a new manufacturing sector in the future.

Tough cuts

by Mary Scianna

Cutting super alloys requires skill, experience and industry know-how

Stay In Touch

twitter facebook linkedIn