Click image to enlarge

What you should consider before purchasing an optical measurement device

by Fritz Jordaan

Due to the extensive range of products available in the market, optical measuring devices range from stereo microscopes, measuring microscopes, and profile projectors, to 2D and 3D vision systems both manual and CNC.

When you are in need of an optical measuring device the following should be taken into consideration.

Part Materials
What material is the part composed of? Customers in need of an optical inspection device usually have features on parts where a mechanical tool is not able to measure these features. In most cases, softer materials and/or smaller features, where a mechanical tool is not able to access the feature and need to be magnified, are reasons to choose an optical inspection device.

Different optical devices measure different parts or features
Stereo microscopes are used to inspect small components. There is typically no need to perform any feature measurements.

Measuring Microscopes aid in measuring small features on parts, by incorporating an X Y travel table. Using a reticle in the eyepiece, or a camera and software to project the image onto a monitor, software can aid in measuring specific features. Measuring microscopes are available in various table and travel sizes, and offer objective lenses to suit optical needs

Shadow graphs and profile projectorsare used to project an image on a screen where it measures the part either by using an overlay chart, or by a counter that can measure more complicated parameters such as diameters, angles, distances, and other geometrical parameters.

Manual and CNC vision systemsare used when many complex features need to be measured on a part. Options vary from manual move XY stages, to fully automated systems that allow customers to change machine parameters such as lighting, various objection lenses, and complex tools to ensure proper feature measurement.

Features on vision systems could include Laser Auto Focus, which is optimal for high speed height measurement, and programmable illumination systems, which ensure measuring edges are properly defined. Where complex surface detail is involved and focusing becomes an issue, multi-auto focus tools can be incorporated to ensure that the correct location is in focus. This is especially important when focusing on transparent or mirror-like surfaces where focusing could be difficult. Projecting a pattern onto the surface of the feature, and allowing the camera to focus on the image of the pattern, will assist in the feature measurement.

CNC Vision systems can be incorporated into manufacturing cells to ensure that the production process is not producing defective parts due to bottlenecks in quality control. Measurement results can be obtained instantaneously and decisions relating to the production process can be made immediately.

The choice in optical measuring systems relies on many factors relating to accuracy, complexity of parts, part material, inspection frequency, throughput and cost. Choosing the correct equipment will ensure that the measurement results being obtained will meet your customer’s measurement results.

Fritz Jordaan, is service manager, Mitutoyo Canada Inc., Mississauga, ON.

Mitutoyo Canada

To see related products click here.

Shop floor evolution

by Kip Hanson

Adaptive machining technologies are changing the way we make parts

Down to the wire

Controlling consumable costs in wire EDM

by Jim Barnes

Wire is one of the most visible costs in EDM. As a primary consumable in the process, most owners are interested in reducing their usage of wire. As with any exercise in cost reduction, though, it is important not to confuse price with cost.

Why invest in automation

By Mary Scianna

ABC Metal Fabricators (a fictitious company) set up shop last year with the intention of automating down the road when business picked up. The company purchased a laser cutting machine and hired an operator to load and unload the system.

Productivity station and autocalibration kit for dimensional measurement

Creaform has updated its MetraSCAN 3D R-series robotic metrology dimensional measurement solution with the R-Series Productivity Station and the R-Series Autocalibration Kit.

Manufacturing skills get schooled

by Tim Wilson

Getting employees lined up with the right skills to get the most out of today’s advanced machining technology can be a challenge.

All-purpose fiber laser for thin and thick materials

BrightLine is a new fiber laser technology from TRUMPF that made its debut at FABTECH 2013 in Chicago, IL.

North American Robotic orders surge in 2014

Robot orders and shipments in North America set new records in the first nine months of 2014, according to Robotic Industries Association (RIA), the industry's trade group.

Aftermarket adapter fits most machines

U-tec a patented flexible tool adapter system from tool maker Heimatec, allows a standard ER output live tool to accept various adapters for different applications.

Absolutely Anything

by Noelle Stapinsky

Striving to be that one stop shop is one small fabrication shop’s secret to its growth

Non-contact measurement in real time

Visionx Inc. has launched new software tools for its non-contact comparative measuring technology that allows users to compare a part to its CAD data in real time, completely automatically - an industry first according to Visionx's distributor Methods Machine Tools Inc.

Resiliency Reigns

by Noelle Stapinsky

Manufacturers continue to focus on investment to remain globally competitive

Improved parting and grooving

Insight into Sandvik Coromant's new CoroCut QD parting off and grooving tool.

Morphing into manufacturing

Rowland Emergency Vehicle Products Inc., Mississauga, ON, began as a repair and maintenance business, but its reputation for developing, designing and manufacturing products that address the needs of its customers has steadily grown.

Your business: Certified to fly

by Tim Wilson

Getting approval to machine aerospace parts worth the effort

Stay In Touch

twitter facebook linkedIn