Better by designClick image to enlargeby Andrew Brooks

People are as important as process when it comes to quality improvement

Quality is a simple enough concept.

But implementing an organizational process to improve and maintain high levels of quality is more complex. Which may be why there are misconceptions about what a quality management system (QMS) is and how to implement one.

“It sounds like an easy definition, but it’s endlessly complicated,” says Dr. Adam Stoehr, vice president, Education & Research at Excellence Canada. Excellence Canada is an independent, non-profit organization and the custodian of the Canada Award for Excellence. It also maintains the Excellence, Innovation and Wellness Standard for organizational performance.

“One of the misconceptions I encounter is that quality management is about ‘counting stuff.’ What it’s really about is people: it’s about how attitude and behaviours in an organization align with certain principles or values. Achieving that alignment and then acting consistently on it is a big part of quality.”

Quality management is a continuous process, not an end state. “Quality is about meeting or exceeding requirements and trying to do that first time, every time, at the lowest possible cost,” Stoehr says. “Really what you’re getting at is a dedication to continual improvement as opposed to a dedication to perfection.”

The fact that the best-known quality specification, ISO9001, is continually being revised is probably the best proof that we’re dealing with a moving target. The latest revisions, introduced last year, broaden the scope of quality improvement to include more of the ‘people’ side – particularly how a business is managed.

“This is very important because you always have to focus on the business side,” says Werner Scheliga, president of Delta Qualified Solutions (DQS) Canada, which provides continuous improvement training and consulting to Canadian organizations, many of them in the automotive sector. “Quality management refers not only to product quality, environmental issues, health and safety and so on, but also to the management culture. You have to look into the overall management of the business.”

The human factor is recognized as paramount in the success of any QMS implementation. Accordingly, one of the latest revisions to ISO9001 is the requirement that the organization identify all ‘interested parties’ early on in the process, both within the four walls and outside, whether customers or supply chain partners.

“The interested parties are pretty much everybody that is connected to your company,” Scheliga says. “So you start with your management and your employees. But it includes your suppliers, your customers, everybody you deal with.”

For a company that’s serious about making real, significant improvements with a QMS, that 360º scope can have serious consequences, up to and including major changes in the supply chain.

“Recently we were helping out a company that had one supplier that was causing them a lot of headaches,” Scheliga says. “The supplier wouldn’t do anything about their non-conformities or take action to correct their processes. In the end, the company decided to look for another supplier. That’s how it works. You try your best, and if that doesn’t work, you go somewhere else.”

If a company is already profitable and well run, implementing a QMS is likely to take much less effort and cause less disruption than many people fear. In fact, it may not even be necessary at all. But once the decision is made, the implementation has to be done carefully. One problem, says Scheliga, is that companies often start off on the wrong foot.

“In a lot of cases companies just set out with a list of what the standard requires and make their operations conform to that,” Scheliga says. “But you really should start with what you’re doing already, how it complies to the standard. Ultimately you see that you may be missing a piece here and a piece there. Rather than doing a complete overhaul with all the cost, effort and disruption associated with it, you can build out a project plan that adjusts what you need to adjust.”

For Adam Stoehr, the key to successful QMS implementation is a three-pronged approach. The first element is the people part: getting everybody in an organization on-board with the need for quality improvement. The second, related element, is putting in place an organizational strategy and a strategic mindset that emphasizes the importance of–and need for–quality improvement. The third is a rigorous approach to that improvement that proceeds deliberately, process by process. Here again, however, many companies get things the wrong way around.

“The process-by-process piece tends to be what people think of first when they think about QMS, and it can be intimidating,” Stoehr says. “You have to get all three parts working together. I think of the process as the three legs of a stool. It won’t stay standing with just one or two legs.”

For organizations that may be concerned about the expense of implementing a QMS, Stoehr has some advice. “If you have a short-sighted strategy, you can see [the expense] as a burden. But long-term, an organization that pays attention to quality reduces the costs of failure, of reworking, redoing, repurposing. Less of that will happen. The upfront costs of training and planning and process improvement–the kinds of things I call prevention costs–are miniscule compared to what you’re preventing from taking place in the future.”

In other words, a quality management system can more than pay for itself. Stoehr points out while that no QMS can prevent every failures or mistake, one that has been implemented properly and is maintained over the long term on a continual-improvement basis will reduce those problems, and enable an organization to deal more effectively with the ones that do happen.

“The end result,” says Stoehr, “ will be lower overall cost.” SMT

CMMs: Choosing the right one for your shop

by Shop MT staff

Quality is critical in manufacturing and coordinate measuring machines play an important role in ensuring that quality.

Why off-line measurement may work for your shop

by Tom Groff , Optical Gaging Products (OGP).

Shop Technology Magazine discusses the merits of off-line measurement with Optical Gaging Products' Tom Goff, and how manufacturers can benefit from the different systems available on the market today.

Metrology: Hand and Eye

by Andrew Brooks

3D quality inspection benefits from optical and contact metrology

Multisensor measuring for complex parts

Carl Zeiss's O-Inspect multisensor measuring machine offers easy, accurate and efficient measurement of complext parts, claims the company.

Looking for trouble

by Kip Hanson

Is your coordinate measuring machine up to snuff?

Power play

by Noelle Stapinsky

Growing global demand for energy could spark opportunities for Canadian manufacturers

Avoiding the hurt

by Kip Hanson

Staying safe and sane on the shop floor

Keeping the doctor away

Creating a health and safety program that fits your shop’s needs

Walter Surface Technologies celebrates $30 million Montreal facility

Walter Surface Technologies commemorated the completion of its $30 million, 92,00 sq ft facility in Point-Claire, QC.

Interactive modular-based gauging system

Mahr has introduced a new interactive MarWin-based gauging software and modular-based gauging system.

Get in line

by Kip Hanson

Machine all the parts you want: you still have to inspect them  

Much of today’s manufacturing environment calls for low volume orders of complex parts.

2019 Business Outlook

by Noelle Stapinsky

Canada’s manufacturing industry is poised to take business to the next level and step up on the global playing field

The case for 3D scanning in additive manufacturing

The need to accurately measure things is as old as civilization itself – the first such known tool, the Egyptian royal cubit, dates back to 3000 BC and was a granite rod setting the standard by which measurements were to be taken. But as we continue to evolve new methods to produce increasingly complex products, measurement tools also need to evolve.

Green Manufacturing About Dollars and Sense

by Michael Ouellette

When it comes to greening your job shop, thinking small can pay big dividends

Stay In Touch

twitter facebook linkedIn