CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

LATEST MAGAZINE

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

Free webinar links CAM software to multi-tasking

Share This Post

Topic: Mazak webinar “Process Planning for Improved Multi-Tasking Machining” 

Date & Time: February 18, 2:00 pm EST

Mazak is holding a free webinar on the role CAM software plays in process planning and optimizing of mill-turn operations. 

 

Derek Patrick, ESPRIT application engineer for DP Technology, will present the Mazak webinar. He will discuss how process planning via full-spectrum CAM software can take the complexity out of multi-tasking machining so manufacturers can produce parts easier and more efficiently.

By the end of the 30-minute webinar, participants will be able to: evaluate different machining scenarios and determine which one is the most efficient for their shop; understand how to coordinate multiple operations for maximizing machine uptime; calculate the average working diameter for OD and ID operations to determine if the two are a good match for simultaneous turning on the same spindle; use synchronization codes to coordinate simultaneous machining operations; and perform a time study analysis for evaluating a complete machining process.

To register for the online event, visit Mazak’s web site.

Share This Post


Recent Articles



Wordpress Social Share Plugin powered by Ultimatelysocial
error

Enjoy this post? Share with your network