CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

LATEST MAGAZINE

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

Cutting hard metals

Share This Post

Walter USA  LLC’s Prototyp Proto·max Ultra ball-nose end mill is designed for efficient machining of hard materials.

The latest generation of the company’s Proto·max solid carbide milling tools offers enhanced machining performance and tool life, even when machining hard ISO-H materials.

The new end mills come in two different diameter ranges: the standard versions from 3 to12 mm diameter and the mini versions for small to extremely small contours, ranging from 0.1 to 2.5 mm. For the smaller diameter range, the Proto·max Ultra’s reduced neck and its reach of up to 10xD are beneficial for the machining of deep cavities. This results in excellent concentricity properties, which are essential at the high speeds achieved by small tool diameters.

 

Primary applications for this new line of solid carbide end mills are hardened materials up to 70 HRC in die and mouldmaking, as well as similar operations in general machining and heavy construction applications. Key features include a new TiAlSiN-based coating, known as TAS for short. This coating is highly heat-resistant, leading to longer tool life when machining hard materials.

Added to this is an optimized geometry for stabilizing the cutting edges. All diameters, even those in the mini versions, have two cutting edges and a helix angle of 30 degrees. When combined, these features enable the Proto·max Ultra to be utilized for semi-roughing and roughing, as well as for semi-finishing and fine finishing.

Walter Tools

Share This Post

Recent Articles




Wordpress Social Share Plugin powered by Ultimatelysocial
error

Enjoy this post? Share with your network