Amanda, Michael and Stephanie Grieger with the new fiber laser cutting machine.Click image to enlargeby Andrew Brooks

Precision metal fabrication is rewarding work, but governments could be helping a lot more

  • Define Metal Fabrication 
  • years in business: 8 ½ 
  • location: Scarborough, ON
  • facility size: 929 sq m (10,000 sq ft)
  • no of employees: 12
  • key manufacturing processes: Bending, punching,  fiber laser cutting, TIG, MIG and spot welding, stainless steel polishing

Define Metal Fabrication owner and president Michael Grieger founded the company in 2011 after he was downsized from the fabrication company he had been with since starting his career. He also spent some time teaching metal fabrication at Durham College in Oshawa, Ont.

Define Metal’s biggest customer is in the marketing and product display market, and almost half of Define Metal’s work is on displays for high end cosmetics. “We work with the awareness that the general public will be interacting with our products,” Grieger says. “That means making sure all the edges are well deburred and that kind of detail.” Define Metal does shelving and displays for a range of other retail-oriented customers. 

But variety is the spice of life, and one of Define Metal’s other major customers couldn’t be farther away from the fashion and retail sphere; it’s a finishing company that refurbishes vessels for the Canadian and U.S. navies.

“We’ll take in airway frames and air hatches and work with our customer to rebuild them,” Grieger says. This involves cutting out the existing louvres that may be damaged or rusted and replacing them with stainless steel louvres and chevrons to original specifications. Then they’re shipped back to Define Metal’s customer, which applies proprietary coatings to restore the components to original equipment standards.

Another line of work is supplying galvanized steel wall systems to a customer who builds prefabricated wall sections for hospitals in its own factory. Prefabrication of building components– sometimes entire rooms–is one of the latest trends in construction and Grieger is happy to have a foot in the door. 

“It’s a very interesting line of business. We bring the material in, we’ll either punch it or laser cut it and bend it, and most of the time it goes out the door as a finished product–there’s no further finishing required.” Some other work for the same customer involves stainless steel work where Define Metal will weld and polish an enclosure, again winding up with a finished product. 

One of Define Metal’s workhorses is its AccurMax AM2258 Ultra CNC turret punch press, which Grieger acquired new two years ago. The AM2258 really shines where a lot of straight edges are involved, as in the wall system work. 

The AccurMax CNC turret punch press.Click image to enlargeWhen it comes to more complex shapes, Grieger knew he needed to up his game, and at the beginning of the year he brought an HK FS3015 25 kW fiber laser on board.

The FS3015 features positioning accuracy of plus or minus 0.1 mm (0.004 in.), a maximum transfer speed of 140 metres (459 ft.) per minute and a maximum cutting speed of 28,000 mm (91.9 ft.) per minute. But its real advantage is the ability to cut complex designs.

“Designers long since threw out their straight edges,” Greger says. “Everything now has curves and angles and so on, which makes punching more of a challenge.” With the turret punch press, radii and arcs have to be nibbled, which isn’t as convenient or efficient and leaves a burr and a sharper edge. 

The laser is also more efficient for the large amount of prototyping and low volume work that Define Metal gets, where the potential cost of the assist gases doesn’t add up as it would on high volume jobs. “The upside with the laser is that you don’t have tool changes,” Grieger says. “You import your DSX file, and from there you make a basic change or adjustment in the cutting head to suit the material that you’re cutting, and you’re away to the races.”

When you ask Grieger what his biggest challenge is, of course he mentions the difficulty of finding skilled labour, as so many shop owners do. But he is especially frustrated by what he sees as an indifferent attitude to businesses like his from the public sector. 

“Running a manufacturing business in southern Ontario, I can’t help but feel that all levels of government, municipal, provincial and federal, have really abandoned Canadian manufacturers. They just don’t support small and medium-sized businesses the way they used to.” 

Grieger would like to see some relief on taxes, and more in the way of financial help with machinery and equipment purchases. But it’s apprenticeship in particular that frustrates him.

“I’ve heard so much about supporting apprenticeships, but I don’t see it happening. Every politician talks about it, but none of them actually do anything.” 

The problem is the lack of education, Grieger says. It’s not just that trades training is frowned on in high school in favour of university preparation–a phenomenon he witnessed as his daughters grew up– but the post secondary training has withered away. The precision metal fabrication course Grieger taught at Durham College was discontinued, and he says Durham was the last Ontario college where it was taught.

“Where are you going to find people to do the kind of work I need? My only alternative is to train up those employees or poach them from competitors, which I really don’t want to do. I’m left to my own resources.”

Two years ago Define Metal hired an apprentice who had worked there in a co-op program in high school. They’re continuing to nurture his skills, but they haven’t found a school to send him to.

“It’s really frustrating. There’s just no schooling to be had. We have yet to find the answer.”

That frustration aside, Grieger has had the satisfaction of seeing his two daughters join the company, the elder in an operational role, and the younger one, who has HR training, handling a number of roles including accounting. 

And the workday of a precision metal fabricator is full of variety, which Grieger says is what keeps him coming back. 

“I try to keep things diverse, so that if there’s an economic downturn, one sector may be down but another one will be picking up. As a result, we cater to many different industries. There’s never a dull moment.” SMT

3X3

by Kip Hanson

Three countries, three machine shops, and a long history of successful manufacturing

Planning Beyond Survival: Setting Priorities

Mike Brownhill, commercial accounts director at Export Development Canada (EDC), suggests a few key factors all manufacturers should take into consideration when planning for 2021.

Job Shops Ontario - A Well-Laid Plan

by Kip Hanson

This established Ontario machine shop gets a new owner, new equipment, new software, and new opportunities

20% faster spot welding robots

New high speed MS165 and MS210 robots from Yaskawa Motoman for spot welding are 20 per cent faster than previous ES series robots.

Hit from Both Sides

by Kip Hanson

Machine shop realizes big benefits from double column machining centre

A stark reality: the case for automation in welding

Pipe welding operations are being squeezed on both ends of the talent spectrum and it’s only going to get worse.

First 5 axis machining from Heinman Machinery

Heinman Machinery’s newest five axis machining centre is offered in two models: the V700 and V43.

Press brake versatility

The HRB Press Brake Series from Amada leverages industry-leading bending technology and a variety of production-enhancing features that can be customized to your specific challenges.

Seen at IMTS: New CNC machining platform

"

SmoothX" Technology is a new CNC machining platform Mazak Corp. debuted at the recent IMTS in Chicago.

Advantages of a through-coolant spindle

Scott and Matt of Haas demonstrate some of the advantages of the Haas TSC system by comparing traditional flood coolant and through-spindle coolant on the same drilling application.

Watejet aids in doubling remote copper mine productivity

A five axis waterjet machine from Jet Edge will help a South African mine to double productivity.

Improved tool-spindle connection rigidity

When machining tough materials like titanium, there is a need for a spindle connection that makes the best use of available power.

An 80% improvement

by Mary Scianna

The Problem: Operator error, lost productivity

The Solution: Horizontal saw to eliminate human error, improve productivity

Alberta oilfield pump manufacturer’s investment in a horizontal saw results in dramatic production efficiencies

Big machine for big part machining

A US manufacturer has installed the largest machine tool of its kind in the country. Merrill Tool & Machine, Merrill, MI, has installed the Mazak Versatech V-140N five axis milling machine.

Precision machining’s expansion in U.S. slowing

The Gardner Business Intelligence (GBI) Precision Machining Index for the U.S. closed May at 58.7, slightly better than April’s 57.9.

Stay In Touch

twitter facebook linkedIn