SPIDER on Restore LClick image to enlargeMaxar Technologies a space technology firm based in Westminster, Col., was selected by NASA to perform an in-space assembly demonstration using a lightweight robotic arm.

The arm, called SPIDER (Space Infrastructure Dexterous Robot), will be integrated with the spacecraft bus Maxar is building for NASA’s Restore-L project, which is being developed to refuel a satellite in low Earth orbit.


The award is valued at US$142 million and follows a successful ground demonstration in 2017, and a review in August 2018 that validated Maxar’s first-generation end-to-end system architecture and detailed robotic arm design.

Maxar is identifying roughly $2 million of work to be performed by West Virginia University through its West Virginia Robotic Technology Center, including independent verification of SPIDER’s capabilities through multiple performance studies to increase the reliability of in-space assembly tasks.

SPIDER will be built by Maxar’s team in Pasadena, Calif., which has previously delivered six robotic arms for NASA’s Mars rovers and landers, including the arm currently operating on InSight Lander and an arm for the upcoming Mars 2020 Rover.

Check out Darpa's concept video:

SPIDER will enable spacecraft components to be robotically assembled and reconfigured while on-orbit. For Restore-L, SPIDER will assemble multiple antenna reflector elements into one large antenna reflector. This revolutionary process allows satellites, telescopes and other systems to use larger and more powerful components that might not fit into a standard rocket fairing when fully assembled.

SPIDER will also demonstrate in-space manufacturing using Tethers Unlimited’s MakerSat. Tether Unlimited is a space tech company in Bothwell, Wash. MakerSat will manufacture a 10-meter lightweight composite beam, verifying its capability to form large spacecraft truss structures for future missions. As it manufactures the beam, MakerSat will characterize the beam’s shape and structural performance to determine if a structure built in space performs differently than one made here on Earth.

“Maxar has always led innovation in space infrastructure, transforming the commercial satellite industry with advances such as high-throughput satellite technologies for high-speed internet and powerful electric propulsion for next-generation space transportation,” said Megan Fitzgerald, Maxar’s Senior Vice President and General Manager, Space Infrastructure. “SPIDER, in combination with our flexible 1300-class spacecraft bus and technologies for in-space operations, will enable new applications in communications and remote sensing satellites, large in-space assembled telescopes and future exploration missions that support a sustained human presence beyond Earth orbit. We’re delighted to add this innovative program to our growing civil and government space portfolio.”

For more information, visit www.maxar.com.

Get on TRAK

by Kip Hanson

Ontario machine shop takes unique approach to employee training, keeps up with customer demands  

Doosan Puma VTR adds Capto quick change

Doosan’s PUMA VTR Series has grown, with two new “C” models incorporating the Capto quick change tooling system made by Sandvik Coromant.


CTMA seeks sponsorship for apprentice bursary

The Canadian Tooling and Machining Association (CTMA) has issued a request for sponsorship amongst its members and affiliates to help support the annual Apprentice Bursary Award program. The program includes awards for pre-apprentices receiving the CTMA's introductory trades training.

Prima Power customer profile: The Williams Brothers Corp.

Shaun Doooner, general manager of the Williams Brothers Corp., discusses why the company has invested in Prima Power fiber laser cutting, bending and shearing equipment.

$30 M+ for Quebec aerospace additive manufacturing

A Swedish additive manufacturing company is investing $31 million in a new automated facility in Broisbriand, QC, that will create 106 new jobs over the next three years. Advanced Powders & Coatings (AP&C), a subsidiary of Arcam AB, made the announcement at the Farnborough International Airshow.

Go big or go home

by Mary Scianna

Double column machining centre opens doors to new markets for Ontario shop

The Problem
Establish competitive niche for large part machining.

The Solution
Purchase a double column, high speed machining centre.

Joint Open House celebrates 10th anniversary

The machine tool distributors' Joint Open House (JOH) in Southwestern Ontario celebrated its 10th anniversary, and hundreds of manufacturers from Ontario and Quebec attended the three-day event.

Ottawa invests up to $20M in auto parts supplier

Ottawa has announced an investment of up to $20 million in Canadian auto parts supplier Woodbridge Foam Corp.

Emuge industry first: general purpose tap

Calling it an industry first, Emuge's MultiTap is a high performance tap designed for threading a range of materials including carbon steel, steel alloys, stainless steel, aluminum, cast iron, copper, brass and bronze.

Shell proposes massive Alberta carbon capture project

Shell Canada has filed a proposal to build a large-scale carbon capture and storage (CCS) project at its Scotford Complex near Edmonton.

US companies using tariffs to hike prices, Linamar CEO says

Linda Hasenfratz, CEO of Linamar, says "opportunistic" US companies are taking advantage of 25 per cent tariffs on metals introduced by President Donald Trump to hike the prices they charge.

Akhurst to distribute Mitsubishi in Western Canada

Akhurst Machinery has been announced as the new Western Canadian dealer for MC Machinery Systems lasers, laser automation, press brakes and shears.

The Internet of Things on the shop floor: White Paper

Walter Surface Technologies has published a white paper on how the Internet of Things is impacting the metalworking shop floor.

Cryogenic machining for aerospace manufacturing

5ME and Okuma have joined forces to demonstrate the advantages of cryogenic machining. The partnership will establish two cryo demonstration facilities, one at 5ME's Technical Center in Warren, MI, and the other at Okuma's Aerospace Center of Excellence in Charlotte, NC.

Organizational changes for Seco in Canada

Seco Tools LLC,Troy, MI, is making organization changes within its Canadian sales team, including the appointment of Branko Hohnec to general manager for Seco in Canada. The changes follow the promotion of Rob Keenan, the current president of Seco Tools LLC, who vacated his position as head of the Canadian sales organization and took on his current role at the start of 2015.

Stay In Touch

twitter facebook linkedIn