Climate neutral: Customers worldwide will receive completely climate-neutrally produced machines from all DMG MORI production plants.  DMG MORIClick image to enlargeby Kip Hanson

Environmentally-friendly manufacturing is not just good for the planet; it’s also good for a company’s employees, productivity and bottom line

Concerns over climate change and the environment have spawned numerous green initiatives throughout Canada and beyond. For example, the Department of Natural Resources has developed strategies to create everything from clean hydrogen to clean infrastructure, electricity, and jobs. And even though the notion of green machining or green sheet metal fabrication doesn’t yet carry much weight for many manufacturers, the fact remains that our future as a species depends on sustainability. Shop Metalworking recently spoke with representatives from three companies that agree with this vital concept, and gathered some insights into the hows and whys of going green. 

Green Machine Tools
Dr. Maurice Eschweiler, chief representative of DMG MORI Aktiengesellschaft, notes that sustainability has always been an important topic for the machine tool builder, long before becoming a focus of global attention. In December of last year, the company announced its intent to manufacture all machines in a “completely CO2-neutral” manner by January 2021. It has developed three programs — GreenMachine, GreenMode, and GreenTech — that support this goal, and help its customers do the same. 

“DMG MORI’s own value creation is completely climate-neutral, and the upstream processes along our supply chain as well,” says Eschweiler. “We increasingly evaluate and select suppliers based on sustainability criteria, relying on digitized processes to enable the transparent recording of emissions, then support our suppliers in reducing them. It’s also important to point out that our customers do not pay extra for a GreenMachine—this is our new corporate standard, and we are taking on responsibility for the environment.”

Eschweiler explains that sustainability is a topic of global relevance, adding that there are many ways to become more sustainable. Most start with small, low-cost measures that can make a big difference — green electricity, for instance, as well as the use of durable, highly productive machine tools that reduce waste. The energy consumption per manufactured part and the machine’s carbon footprint over its entire lifetime are also key factors. 

“With our ‘First Quality’ campaign, we strive to ensure that our products remain in service for up to 30 years or even longer,” he says. “In this way, we avoid waste and conserve resources. We also focus on using a high proportion of recycled and recyclable resources in our machines, and use energy-efficient, state-of-the-art components wherever possible — for example, we were able to decrease energy consumption in our DMF 200|8 traveling column machine, introduced in 2020, by around 25 per cent compared to its predecessor.”

Machining with minimum quantity lubrication (MQL) is not only good for the environment, it’s good for productivity and tool life. DropsA USAClick image to enlargeGreen Lubrication
Ryan Mikolasik, marketing manager at lubrication system provider DropsA USA, offers numerous reasons why shops should switch to minimum quantity lubrication, or MQL, energy savings chief among them—compared to a 7 kW (10 hp) coolant pump at 80 bar (1160 psi), an MQL system saves roughly $3500 annually in electricity expense. In addition:

Up to 15 per cent of overall machining costs are directly related to cutting fluid. MQL greatly reduces this figure. 

Routine checking of concentration levels in emulsion-type cutting fluids adds approximately $650 per year to machine operating costs.

MQL eliminates the need for filtration units, chillers, chipdryers, coolant disposal, and associated handling costs.

And because MQL delivers smoother surface finishes and longer tool life than traditional cutting fluids, the machining cost per workpiece is generally lower. 

According to a study conducted with a leading European equipment supplier, the total operating costs for a typical machine tool over a ten-year span are up to 18 per cent lower when running MQL, due to reduced energy and fluid consumption, improved tool life, and the reclamation of floor space that would otherwise be needed for fluid handling equipment.

“MQL can also be used with cutting fluids that are much more environmentally friendly than traditional oils and emulsion-based fluids,” he said. “In our case, we recommend a proprietary mix of grapeseed oil that’s blended with various additives. It contains no harmful VOCs (volatile organic compounds) so is healthier for the environment as well as the machine operator. In addition, it’s proven to be highly effective when utilized with our MQL dispensing units.”

A drone’s-eye view of Skyline Zipline’s earth-friendly facility in British Columbia. Skyline ZiplineClick image to enlargeGreen Manufacturing
And then there’s Skyline Zipline Ltd., a vertically-integrated zipline manufacturer whose owner Kevin Smith “has always been passionate about the outdoors and wanted to minimize our impact on the environment.” That’s from marketing and business relations manager Noah Smith, who says the company prides itself on minimizing its ecological footprint wherever possible, and reuses, refurbishes, or recycles many of the components used in its 152,000 m (500,000 ft.) of zipline installations.

Smith offered an impressive list of green technologies leveraged in the “ultrapassive construction” of the company’s facility in British Columbia. Among them are an 8 kW solar array on the roof, one that’s already large enough to power the machine shop but will soon be expanded to 16 kW. And to store any excess electricity not sold to the regional power grid, there’s a Tesla wall onsite that also
acts as a backup system in the event of a power failure. 

Aside from housing solar panels, the roof also collects rainwater for storage in a 38,000 liter (10,000 gallon) reservoir, which is used to irrigate the plants and green space around the site. High efficiency appliances and LED lighting are installed throughout, and the largely underground building itself was constructed with extra-thick walls and triple-pane windows. Says Smith, “We’re so energy efficient that it can actually get too cold in the summer and too warm in the winter.” He laughs. “It’s not a bad problem to have.” SMT

Sandvik Additive, Renishaw collaborate on additive manufacturing materials

Renishaw is collaborating with Sandvik Additive Manufacturing to qualify new additive manufacturing (AM) materials for production applications. This encompasses a broad range of metal powders, including new alloy compositions optimized for the laser powder-bed fusion (LPBF) process and which provide superior material properties.

Raising the bar

by Mary Scianna

Ontario machine shop develops unique approach to machining large propeller blades and waterjet impellers

New wind turbine manufacturing plant in BC

Endurance Wind Power Inc., Surrey, BC, has opened a new 40,000 sq ft facility to manufacture wind turbines.

Additive manufacturing for motorbikes

Additive manufacturing technology from Renishaw improves bike's front suspension system

TransFIORmers, a Moto2 race motorcycle, is defying conventions by racing with a front suspension system that is radically different compared to any other Moto2 race bike; a suspension system inspired by Christian Boudinot's mentor Claude Fior, a maverick bike designer.

High Fidelity

by kip hanson

Calgary job shop owner attributes his shop's rapid growth to EDM machining capabilities 

Unique machining concept: Multi-task turning

Mazak's Orbitec 20 is a unique machine originally developed as a customized solution for a customer application.

Showcasing the power of turn-mill machining

Manufacturers in Western Canada witnessed the benefits of turn-mill machining at seminars held recently in Winnipeg, Calgary, Edmonton and Vancouver.

The equipment: DSA Precision

by Mary Scianna

DSA Precision Machining’s workholding investments include the Lang Makro-Grip vises and Quick-Point zero clamping system, and SPD electro-permanent magnetic chucks. The products were all purchased from workholding product distributor, Machine Tool Solutions Ltd., Brampton, ON.

Small But Mighty

Kip Hanson

Micromachining is a big business that’s only getting bigger.

Here are three keys to success in an increasingly competitive field

Canada, US manufacturing improves

Despite the continued economic uncertainty around the globe and the faltering manufacturing industry in China, North America’s manufacturing industry continues to show signs of improvement.

3000+ attend HaasTec open house in California

Close to 3,300 people attended Haas' four-day open house, HaasTec, held March 17-20 at its Oxnard, CA, headquarters and manufacturing facility.

Delcam opens Quebec office for French-speaking customers

Delcam has opened an office for French-speaking Canada, based in Quebec.

Going 3D


by Mary Scianna

Ontario firm sets growth sites on additive manufacturing

When Tharwat Fouad decided to expand his manufacturing business in 2012, he investigated many options before finally setting his sites on additive manufacturing.

FIELD NOTES: Delta Machine & Design

Product: LPM VMC
Supplier: TRAK Machine Tools
End User: Delta Machine & Design

Stay In Touch

twitter facebook linkedIn