Haimer shrinkfit toolholding systemClick image to enlarge

A US shop has doubled tool life and cut overall machining costs by introducing a new toolholder system from Haimer USA into its operation.

Applied Engineering Inc., based in Yankton, SD, spends significant amounts of money on tooling annually.

“We’re always looking at ways we can improve our processes,” says Greg Husman, the company’s optimization manager. “What we’ve found is that balancing and heat shrinking our toolholders gives us repeatable and predictive results.”Haimer shrinkfit toolholding system Click image to enlarge

The 165-employee shop specializes in short and long-run aluminum components for several industries, mainly aerospace and aircraft. Many of those components are used in navigation and weather radar systems for commercial aircraft. The company also launched its own line of compound bows, making itself more diversified and competitive in a different market.

With dozens of horizontal machining centres that rotate up to 20,000 rpms, Applied Engineering knows that proper toolholding is critical to extending tool life. It’s also a key factor in machining accuracy and repeatability.

But until recently, proper toolholding came at a high cost.

Pressure is On

Applied Engineering had been spending US $40,000 per year on parts for its existing toolholding system, which required specially designed collets to be pressed into toolholders. Though the system achieved decent runout, the costs were difficult to justify.

A few years ago, Applied Engineering began searching for a comparable system that was less expensive. It found one in 2012, while visiting the Haimer USA booth at the IMTS show.

Haimer’s shrink fit system claims to have higher gripping torque, accuracy, and balance repeatability than other systems. A key difference is that it uses heat rather than collets or hydraulics to grip a part. With the push of a button, the toolholder is heated up and the cutting tool is inserted. Then the holder is cooled down in 30 seconds. As a result, the toolholder and cutting tool become virtually one piece.

Applied Engineering decided to give the Haimer system a try and the results were eye-opening. The company saw a dramatic improvement in runout, gripping force, and balance, the three main variables in toolholding. Tool life increased from 80 parts to more than 600 parts on a consistent basis.

“The Haimer system paid for itself in less than a year,” Husman says. “Not only have we increased tool life on many of our tools, but the quality of our parts is increasing just from the repeatability of tooling. We’ve also noticed an improvement in surface finishes and cycle times. Though we still use both systems in order to remain diversified, the Haimer system is a better fit and much more economical.”

Another key benefit was balance repeatability and balance options. Because there are no moving parts with the shrink fit system, additional fine tuning is not often necessary. However, the company decided to purchase Haimer’s modular balancing system to improve tool life for its other toolholding system.

“The balancer alone has helped us beat tool life expectations by at least 20 per cent. When combined with the shrink fit system, which helped us improve runout from .0007 to .0002 of an inch, we can achieve near perfect conditions. Haimer’s balancer can be used for any of our toolholdling systems; the heat shrinking just takes it one step further.”

Because of the high gripping torque of the Haimer shrink fit system, Applied Engineering also noticed a reduction in scrap. In fact, the company was able to cut its scrap in half last year, thanks in part to the new system. Now the company is spending less money on tools and toolholding, but achieving many more benefits, including higher quality parts.

“We’ve been very pleased with the products and service offered by Haimer USA,” Husman said. “The company provided training on the shrink fit system and balancer soon after delivery and have been quick to answer additional questions. They’ve been very good to work with.”

Turn-milling benefits

by Andrei Petrilin

How turn-milling can increase cutting efficiency

Jumping into the Melt Pool

by Kip Hanson

Will hybrid additive CNC machine tools become the new norm of manufacturing?

Saskatchewan native Al Hunter was foundry industry pioneer

William Allen, president of Hunter Automated, Schaumberg, IL, and a pioneer in the machine foundry industry, has died.

The new normal

Automotive manufacturers shift from working harder to working smarter with bigger focus on innovation and technology

The additive way

A Q&A with Renishaw Canada’s Mark Kirby about the current state of additive manufacturing

Machinists, welder set to compete at WorldSkills 2015

Tyler Magri, Trevor Fandrick and Tommy St-Martin have one thing in common: they'll all be representing Canada in CNC machining and welding at the WorldSkills Competition in August in Sao Paolo, Brazil.

Cobot ROI calculator

Cobot Nation, one of the largest global sellers of cobots, has released a cobot return on investment (ROI) calculator.

Advanced manufacturing gets major financial boost

Ontario manufacturers will soon be getting support for advanced manufacturing practices through a newly announced Advanced Manufacturing Fund.

ATI Stellram acquires Greenfield threading line

ATI Stellram has acquired the Assembled Threading Tools product lines of Greenfield Industries Inc.

Toolholders MetalTech Report

Emuge
Tool clamping for high speed
Emuge Corp.’s tool clamping system, the PGR, is designed for carbide and HSS cutting tools, taps, thread mills, and end mills.

New fiber laser machine OEM in Canada

Rhino Cutting Systems is the latest Canadian company to enter the fiber laser cutting market. The company's made-in-Canada fiber laser cutting machine made its debut at FABTECH 2014 in Atlanta, GA, last November.

Oilfield equipment maker saves 184 hours on one cutting tool head

A oilfield equipment manufacturer is saving time and money in its manufacturing process thanks in part to an angle head from Heimatec.

Makino

Makino is a world leader in the manufacture of advanced, high performance CNC machining centers, including horizontal machining centers, vertical machining centers, 5-axis machining centers, graphite machining centers, and wire and sinker EDMs.

Ontario invests $55 M for skills training

The Ontario govvernment is adding $55 million to apprenticeship training initiatives that will include programs to raise awareness about careers in the skilled trades.

Feds invest $49 billion for aerospace innovation

The Federal Government of Canada is investing $49 billion in aerospace innovation to support competitiveness in the sector.

Stay In Touch

twitter facebook linkedIn