Nicholas Bergmann is general manager at EXSYS Tool Inc. Click image to enlargeby Nicholas Bergmann

Perform a five-point tool head preventive maintenance inspection

Regular inspection and maintenance of live tool heads can increase service life by as much as five times. A live tool system preventive maintenance program ensures part accuracy, increases cutting tool life, reduces scrap, improves reliability and overall confidence in lights-out operations, and lowers overall toolholder costs.

The following five-point inspection can help ensure live tool heads deliver high value and production accuracy.

Measure spindle runout. Rest a dial test indicator tip on the inner surface of the collet pocket and rotate the live tool head. The maximum runout for live tools is typically around five microns in the collet pocket. If in excess, then the problem could be a bent spindle or bad bearings. Excessive runout in the spindle puts an additional load on the bearings, ultimately decreasing overall service life.

Check for radial play. While the dial test indicator is in the collet pocket, simultaneously check for radial play. If movement shows up on the indicator when toggling the spindle, then there is a problem with the bearing preload; the bearings and seals should be replaced.

Examine the rotation. Live tool heads should rotate smoothly, be free of any binding, and should have no real audible noise coming from the bearings while spinning the tool. This can be rated on a scale from one to five.

Maintenance intervals depend on many variables, but a general rule of thumb is to conduct a five-point inspection at least every three months.Click image to enlargeVisually inspect the live tool head. Check for any damage from crashes, excessive wear to the drive coupling, or rust in the collet pocket.

Inspect for coolant contamination. Coolant contamination is the number one failure mode of live toolholders, and the catalyst is heat buildup. If live tool heads get too hot, the heat can deform, swell, or burn the contact surface of the seals that hug the spindles, making it easy for the coolant and fine metal chips to enter the heads and begin the degradation process. If the live toolholder has an easily accessible cover plate, remove it and inspect for coolant contamination.

Proper coolant care is the only controllable variable in increasing live tool head service life; it’s also important to maintain coolant concentration by measuring it using a refractor as opposed to visually with the naked eye. A refractor can determine if the coolant is rich or lean. If the concentration is rich and more concentrate is added, there is a reduction in coolant capacity. On the other hand, if the coolant is lean and not enough concentrate is added, there is the risk of shorter tool life, poor surface finish and machine corrosion.

While exact maintenance intervals and service life for a live tool head depend on application variables such as workpiece material type, cycle times and coolant condition, a general rule is to perform the five-point inspection at least every three months. Maintain a log of inspection findings to track a live tool head’s performance throughout the years. This will help indicate when it is time to remove a live tool head for routine maintenance and help establish an accurate maintenance budget. Be sure to record findings specific to the coolant maintenance to track when the system requires cleaning or a new coolant batch. Include details such as concentration ratio, filtration system, water hardness and bacteria levels. SMT

Nicholas Bergmann is general manager at EXSYS Tool Inc.

 

Cutting and gear tool providers form strategic partnership

Cutting tool and gear tool providers Star SU and Louis Bélet have entered into a strategic partnership to enhance each companies’ product portfolio and expand collective reach within the Americas and Europe. 

Doosan's five axis machine in action

Doosan Machine Tools showcases its five-axis machining centre.

2018 SHOP TALK

by Andrew Brooks

Job shops in Canada discuss challenges and successes

Selling Your Family Business

Selling a family business is a major decision that some might be considering as the economy transitions from recession to recovery.

Barreling Down

Circle segment cutters are reshaping how shops attack complex surfacing operations

Ready Your Shop for Toolroom Automation

by Bill Obras & David McHenry

Multiple technologies must work together for equipment compatibility

High flexibility tool grinder

Grind and re-sharpen rotationally symmetrical tools with the Walter Helitronic Raptor from United Grinding Group.

Leaders: Believe in Manufacturing

CMTDA president and Megatel senior partner Marc Hasrouny addresses metalworking’s most pressing challenge

5 Ways to extend cutting tool life

by Mary Scianna

Save costs and improve machining performance

5 Axis machining metrics

by Vince D'Alessio

Why kinematic measurement is important for five axis machining

World's most insane engineering marvels

The engineering wonders of the modern world

Parting Ways

Still using yesterday’s grooving and cutoff tools? Time for an upgrade.

Improved clamping for parting insert

Iscar has upgraded its Do-Grip double-ended DGN/R/L inserts for parting with an improved clamping system.

Selecting a Positioner

by Cliff White

Factors to consider to ensure you have the right one for your shop

Straight, Smooth, and Round

by Kip Hanson

Ensuring drill hole integrity

Stay In Touch

twitter facebook linkedIn