Click image to enlarge

by Mary Scianna

Cost effective ways to remove chips

If you’re machining metal, you’re generating chips. And if you’re generating chips, you want the most cost effective way to eliminate them.

There are several ways to improve chip handling efficiency and create more value for your chips, but the type of products and system you select will depend on a number of factors. One is the size of your shop. If you generate large chip volumes from multiple machines, automation may be an option. Another factor is whether your chips are ferrous or non-ferrous. Ferrous chips allow a shop to consider magnetic conveyors or magnetic filtration systems. The third factor is budget; chip handling systems can range from a few thousand dollars to $100,000+ for large scale automation.

If your shop uses a chip conveyor, “with a conventional belt style one, chips and coolants run through the conveyor via holes in the steel belt,” explains John Mackowski, product manager for metalworking, Eriez Magnetics, Erie, PA. “The chips tend to remain inside the housing of the conveyor where the bearings and other moving parts are located. The chips grind away at various items causing the conveyor to fail.”

One solution is a magnetic conveyor. Eriez offers a model with sealed units to prevent chips or coolant from getting to the mechanical moving parts, reducing the chance of failure. 

Magnetic filtration systems are another option. Eclipse Magnetics has a system for sub-micron filtration of industrial fluids that it claims cuts filter costs by up to 100 per cent and extends fluid life by a factor of ten.

But these systems can only handle ferrous materials. And conveyors are also typically more expensive than standard hinged-belt type conveyors, “but if one takes into account machine downtime when a conveyor is not functioning properly, along with the repair costs incurred, the magnetic conveyor may be a better choice in the long run,” says Mackowski.

Waste coolants and chips represent a signficant cost. Coolants are expensive and when chips are mixed with them, they can’t be recycled to extend coolant life. Also, chips with coolants are wet and heavy, and will cost more to dispose of because of the weight.

Products such as chip vacuums and filtration systems can help. Exair, for example, offers a “Chip Trapper” and a “Chip Vac.” The Chip Trapper extends coolant life, says Kirk Edwards, applications engineer with Exair Corp., Cincinnati, OH, by sucking "the coolant out of your sump and cleans it by trapping shavings, swarf and chips in a reuseable filter bag. Fewer chips in your coolant means fewer surfaces for bacteria to grow. It also delivers cleaned coolant back into your coolant sump and provides aeration, which is important to keep bacteria at bay.”

Vacuum systems are a good option for shops with multiple materials, adds Edwards. The company’s Chip Vac mounts on to standard 30, 55 and 110 gal drums. “By using different drums for different materials, it aids in sorting chips for recycling, and recovrs some cost of material while keeping your shop clean.”

Long stringy chips are problematic when they accumulate. “On mechanical conveyors, these chips get stuck in the moving parts and eventually jam the conveyor and stop it from running,” says Mackowski. “On magnetic conveyors’ these ‘birds’ nests’ are so light and physically big they do not have much steel in them and don’t allow the magazine sufficient material to ‘grab on to’. They just sit on the slider surface of the conveyor and conglomerate until they fill the entire conveyor.”

They won’t “jam” the conveyor as they would on mechanical conveyors, but they also won’t convey well on the magnetic conveyors, adds Mackowksi.

“A common remedy for magnetic conveyors is to use a rare earth magnetic or two in place of the standard ceramic magnetic elements. The rare earth materials is many times stronger (and many times more expensive) than the ceramic magnets. They may capture and convey the birds’ nests, but there are no guarantees this will work either.”

Ways To Reduce Chip Handling Costs
Reduce transportation and disposal costs. 
Condense, crush and compact your chips and eliminate fluid content to reduce volume and reduce disposal costs.

Extend coolant life and cut coolant consumption costs.
Chips in coolants will create bacteria and shorten coolant life. Removing the build-up of chips via conveyors or other handling methods will help extend coolant life and allow manufacturers to recycle the fluid.

Increase worker safety.
Sharp chips lying around a machine floor are a potential health hazard to machinists and other workers in the shop. Eliminating them will reduce the risk of worker injury and eliminate potential lost labour that could result from an injury.

Reduce maintenance costs.
Workers spend less time cleaning up chips on the floor and more time focused on machining. Automated systems reduce maintenance costs even further. SMT

Eclipse Tools Inc
Eriez
Exair

 

Avoiding the daily grind: Cutting hard metals

by Kip Hanson

The Problem: Achieving satisfactory tool life when machining 55-62 HRC steel alloys

The Solution: CBN-tipped turning, profiling, and grooving inserts

Alberta shop overcomes hardened steel machining challenges

Skills Training: The Missing Sizzle

If Brian Philip could change education in manufacturing in secondary and post secondary institutions, he would add the missing “sizzle” to the steak.

The Art of Tool Balancing

by Kip Hanson

Improved tool life and machine performance are accessible to everyone. Here’s how.

Tooling Up for Automotive

by Kip Hanson

In response to lightweighting initiatives, cutting tool suppliers are tackling new materials, forming new partnerships

Nova Scotia: In Position

by Andrew Brooks

Poised to grow – but ‘hanging on’ for now

All Hands on Deck

by Noelle Stapinsky

Old school manual rules allow an east coast machine shop to maintain its quality standards

Chipping away at a problem

by Mary Scianna

Cutting tool design is crucial for effective chip management

Kennametal, Sumitomo Electric partner on technology

 

Kennametal and Sumitomo Electric have signed a licensing agreement under which Sumitomo Electric will provide and support Kennametal's new and advanced KM4X spindle connection solution to Sumitomo Electric customers globally. Sumitomo Electric is a supplier of electric wire, optical fibers and cutting tool products.

Ream team

by Kip Hanson

Cutting tool manufacturers weigh in on the benefits of reaming

Overdrive automotive cutting tools

Automotive Cutting Tools

by Tim Wilson

Now that the automotive industry is back in gear, the new manufacturing environment is proving itself to be highly competitive, with improvements occurring in all areas, including materials and tooling.

Beating Vibration

By Jim Barnes

Dampening vibration in extended reach toolholders boosts productivity

Extended-reach tooling can provide significant  productivity benefits through reductions in setup times.

Endmills with Safe-Lock protection

The new Power Mill solid carbid endmills from Haimer are made from fine grain carbide and are equipped with the company's pull out protection system, Safe-Lock, which has become a standard for HSC and HPC machining. Endmill geometries are based on an unequal flute and helix design for chatter free high end machining. All tools are coated with latest PVD technology and have an extremely smooth surface for the best possible chip evacuation.

Steven Baier to head sales for Haimer USA

Steven Baier has been named national sales manager for Haimer USA and will oversee sales in Canada and the US.

“Steven’s extensive experience in tool holding and machine tool accessory sales makes him an ideal fit for our organization, and we are thrilled to have him here at Haimer to help lead our sales team,” says Brendt Holden, president of Haimer USA. Baier was previously with Lyndex Nikken for 12 years, where he served as the midwest regional sales manager.

Thrilling Threads

by Kip Hanson

These alternatives to drilling can help save time on internal threading

Job Shops Alberta - Growth by Design

by Mary Scianna

Strategy and hard work a winning combination for growing job shop

Stay In Touch

twitter facebook linkedIn