Click image to enlarge

If you think manufacturing is in a downturn, think again, says Brian Papke, president of Mazak Corp., Florence, KY.

"Manufacturing in North America has grown for the past 26 months in a row, which means we've had continuous growth in manufacturing during this time, but that's not the impression we're getting when we hear the news. Equipment utilization is at high levels nearing 76 per cent on average and it's hard to find used machines,” says Papke.

Indeed, Mazak has witnessed tremendous growth; orders in 2010 were up 99 per cent and incoming orders for 2011 are expected to be higher than pre-recession levels in 2008. As of the time October 2011, orders were up 81 per cent.

And Mazak is experiencing this growth because manufacturers in Canada, the US and Mexico are purchasing equipment, much of it machine tools now made at Mazak's North American headquarters in Kentucky

Papke spoke at a recent press conference during Mazak's T3 (Tomorrow's Technology Today) event, part of the company's annual Discover Mazak events that seem to growing in popularity among manufacturers.

"When we set up this two-week event, we had a registration goal of 1500 but 2500 have registered and there have been 1300 registered just in the first week alone.”

Papke adds that to date he has spoken to approximately 300 customers and "no one was negative; all were positive about growth in industry.”

As part of the two-week event, manufacturers toured Mazak's sprawling 440,000 sq ft manufacturing facilities to see how the company manufactures more than 100 different machine tools using what it calls a ‘production-on-demand” model, a just-in-time type manufacturing approach by which inventories are kept low and machines are made according to market demands.

The Florence, KY, manufacturing operation has the ability to produce 135 machines a month and Papke says in October the company will have produced 130 machines.

Two of the machines manufactured in Florence, KY, and highlighted at the event are the QTN450 multi-tasking machine, which features a special combination tailstock, equipped with a bull nose center and a 1016 mm (40 in.) boring bar, for deep-hole boring to depths of up to 800 mm (31.5 in.), and the Orbitec, a unique machine created for odd-shaped parts that are difficult to hold and difficult to machine.

Papke's message is that there are opportunities for manufacturing growth in North America. "Customers see opportunity in manufacturing and just want solutions that will help them be more productive.”

 

Celestica wins ventilator manufacturing contract

Celestica Inc. has won a program to build 7,500 ventilators for StarFish Medical Inc., a Canadian medical device company, at Celestica’s operation in Newmarket, Ont. 

High school students join Sandvik for Manufacturing Day

Ontario high school students joined Sandvik Coromant Canada for Manufacturing Day to gain some insight into manufacturing and consider it as a career choice.

Tobias Kuehnle new managing director of TRUMPF Canada

Tobias Kuehnle has been named managing director of TRUMPF Canada Inc., effective April 1, 2018. He succeeds Stefan Fickenscher, who moves to the role of sales director of TRUMPF's machine tool division, based in the US.

Magna CEO sees “huge opportunity” in ongoing tariff war

Magna CEO Don Walker has told CNBC money columnist Jim Cramer that the Trump administration’s tariff campaign may have a silver lining.

Canadian manufacturing sales up 3.7% in February

Total manufacturing sales in Canada rose 3.7% in February, according to advance results from Statistics Canada.

Nicolas Gaube named technical sales rep at Schunk Canada

Nicolas Gaube has started a new position as technical sales representative at Schunk Intec Corp. in Mississauga, ON.

New automotive wireless detection technology

New wireless pedestrian detection technology moves cars closer to “computer on wheels”

General Motors is developing a driver assistance feature potentially capable of detecting pedestrians and bicyclists on congested streets or in poor visibility conditions.

$800,000 in Fed funding for Memex Automation

Memex Automation, a Canadian supplier of manufacturing M2M productivity software, has received $800,000 funding from the Federal Economic Development Agency for Southern Ontario. The repayable loan will allow for accelerated development of the company's flagship product, MERLIN, and create 16 new jobs at the Burlington, ON, company.

IMTS 2016: Collaboration meets digital innovation

In a world where technological changes are occurring at a dizzying rate, no company can be an expert in every area. Partnering with companies with expertise in different technology areas is the best way for suppliers to provide manufacturers with comprehensive solutions for customers. This collaborative approach was clearly evident at IMTS 2016.

FedDev Ontario pumps $7.8M into 3 York region manufacturers

FedDev Ontario, the federal department tasked with boosting manufacturing fims in the province, has invested $7.8 million to help three manufacturers increase productivity, capacity and create 116 skilled jobs.

Automotive sector in Canada 2019: Fresh Start

by Noelle Stapinsky

Cautious optimism for growth prevails in Canada's automotive manufacturing sector

Affordable modular CMM fixturing

by Bill Reilly

How many times have you spent hours struggling with vices, blocks, clamps, and even glue, in an attempt to create some sort of rudimentary CMM fixture to hold the part you need to inspect? If you just rolled your eyes, then read on.

DP Technology gets Mazak certification

DP Technology Corp., a CAM software supplier based in Camarillo, CA, is now a certified "Value-Inspired Parnter" (VIP) with Mazak Corp., Florence, KY (Mazak Canada, Cambridge, ON).

IN HER WORDS: Jeanine Lassaline-Berglund on how to attract and retain more women in manufacturing positions

Metal manufacturing faces a severe shortage of skilled labour. Women remain a largely untapped resource despite making up almost half of the Canadian labour force. How can we change that? Female leaders share their views on the challenges and opportunities of pursuing a career in metalworking in our new digital series.

Manufacturing sales continued growth in December, advance results show

Manufacturing sales are expected to have risen 0.8 per cent in December, driven in part by higher sales in the fabricated metal products and motor vehicle industries, according to an advance estimate released by Statistics Canada this morning.

Stay In Touch

twitter facebook linkedIn