CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

LATEST MAGAZINE

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

Multi-process power source and feeder

Share This Post

ESAB Welding & Cutting Products’ Warrior, a new multi-process power source and feeder that made its debut at FABTECH 2012, in Las Vegas, is designed for shipbuilding, rail car construction, mobile machinery construction, energy generation construction, pipe welding, general fabrication, and repair and maintenance.

Developed for GMAW (MIG), FCAW (Flux-Cored), SMAW (Stick), and GTAW (TIG) welding, as well as ACAG (Arc Gouging), Warrior delivers up to 500 amps @ 60% duty cycle. 

“Our customers told us they needed a rugged, workhorse of a machine that could withstand harsh welding environments,” says Greg Stauffer, vice president for sales support and standard equipment (ESAB North America). “Warrior gives them superior welds time after time; you have the reliability and efficiency of inverter technology.”

Designed with input from welders, Warrior carbon arc gouges with electrodes up to 3/8 in. (9.5 mm) diameter, welds .030 – 5/64 in. (.762 – 2 mm) flux-cored and solid wires, and has a full range of SMAW (Stick) capabilities with excellent 7018 and 6010 performance.

It delivers consistent, reliable performance, and its air tunnel design creates a “dirty” air side and a separate “clean” air side to ensure long-term reliability of critical electronics. 

The durable external body withstands the elements. Its’ IP23 rating is designed to endure harsh outdoor environments, up to 60° driving rain. Ergonomically designed handles are built to withstand mechanical hoisting, and double bend 14 gauge steel side panels protect Warrior against collisions and drops.

The user-friendly design places all controls on the front panel, including the power switch. The knobs are protected, and are designed for use when wearing welding gloves. A simple and clear user interface makes it easy for anyone to get started welding within a few seconds.

Perfect for remote job sites, it is generator-compatible, and the sun-friendly display makes it easy to see your settings when welding outside.  

The Warrior Feed 304 is an all-new rugged, user-friendly wire feeder. It features a high-torque four-roll drive, which gives superior feed even with long GMAW (MIG) guns and better feedability than a two-roll drive. This feeder includes all the controls you need to get the job done – including remote voltage, gas purge, inch wire, and wire feed speed (WFS), trigger lock, and slow run-in.

ESAB

Share This Post


Recent Articles



WordPress Ads
Wordpress Social Share Plugin powered by Ultimatelysocial
error

Enjoy this post? Share with your network