Lincoln Electric’s new UltraCore HD-M flux-cored wire is a 75 per cent Argon, 25 per cent CO2 gas-shielded flux-cored (FCAW-G) wire was designed to provide the high deposition rates and flat bead appearance required in many out-of-position applications. It features premium arc performance and fast freezing slag.
- High deposition rates – More than10 lbs./hr. out-of-position
- Fast freezing slag for a flat bead shape and increased productivity in all positions, including vertical up and overhead
- Wide operating range allows operators to set the machine on a single setting and weld in all positions.
UltraCore HD-M wire meets the most demanding requirements for shipbuilding and general fabrication industries. With high deposition rates and a broad operating range, this flux-cored wire is capable of delivering a flat bead face when used in all positions.
This flux-cored wire conforms to AWS A5.20/A5.20M: E71T-1M / 9M-H8 classification and is ABS approved to 3YSA H10.
Available in 15 lb., 33 lb., and 50 lb. packages, UltraCore® HD-M wire comes in standard diameters of .045, .052 and 1/16 inches.
UltraCore HD-M compliments its counterpart UltraCore HD-C, a mild steel FCAW-G wire designed to use with 100% CO2 for a flat bead appearance.