CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

LATEST MAGAZINE

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

Faster waterjet cutting speeds

Share This Post

Jet Edge’s 100hp, 90KSI (75kw, 6200 bar),  X-Stream xP90-100 waterjet intensifier pump is capable of producing 90KSI (6200 bar) and supports 75KSI (5200 bar) continuous operating pressure.

It will be displayed at the FABTECH Show in booth C4349, November 12-14, Las Vegas, NV.

The X-Stream achieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60KSI (4100 bar) water jet pumps, enabling users to increase productivity and reduce part costs.

The X-Stream produces 50 per cent more pressure than a 60KSI (4100 bar) intensifier pump, resulting in a 40-50 per cent increase in productivity for many materials. Compared to a 60KSI (4100 bar) pump, typical operating pressures of 75KSI (5200 bar) use 30 per cent less water, 30 per cent less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. The xP90-100 is capable of producing flow rates of 1.45gpm (5.49 L/m) and supports up to a .017” (.43 mm) orifice.

Fittings and tubing are rated for 100KSI (6900 bar). The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology.  The X-Stream is also available in a 50hp (37kw) model.

Jet Edge offers the widest range of waterjet pumps in the industry. Its pumps include hydraulic intensifier pumps and direct drive pumps.  36KSI (2500 bar), 60KSI (4100 bar) and 90KSI (6200 bar) models are available from 30-280hp (22-208kw).  Electric and diesel models are available.

Jet Edge

 

Share This Post


Recent Articles



WordPress Ads
Wordpress Social Share Plugin powered by Ultimatelysocial
error

Enjoy this post? Share with your network