CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

LATEST MAGAZINE

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

Automatically control flare with servo driven anti-flare fixture

Share This Post

Bradbury Group has introduced a servo driven anti-flare fixture.

Pre-cut roll forming lines are known for quick changeovers between part sizes because there is no requirement to change profiled cut-off blades.

This results in higher line efficiencies and production. With Bradbury’s Auto Anti-Flare Fixture, precut parts can be formed without sacrificing quality. The fixture will reduce flare tolerance in pre-cut steel framing and purlin roll forming lines to +/- 1.0 degree deviation measured in the flare zone.

The anti-flare fixtures, located at the exit end of the roll former, detect the lead and trail end of each part and automatically adjust the rolls to reduce flare on a pre-cut part. Adjustments can be made based upon material yields and strengths. Fixtures may be added to an existing Bradbury purlin or steel framing line or purchased with a new line.

Share This Post

Recent Articles




Wordpress Social Share Plugin powered by Ultimatelysocial
error

Enjoy this post? Share with your network