Iscar’s die and mould making solutions

Share This Post

For any cutting tool manufacturer, die and mould making is a highly important customer segment.

This industrial branch not only consumes more and more tools but constantly puts forward new demands, which have a significant impact on advances in cutting tools. These demands are typical for every metalworking sector; the customer is always interested in more productive, reliable, and accurate tools. However specific features of die and mould manufacturing necessitate special design considerations beyond the general requirements.

Materials, machined shapes and machining strategies are three distinctive hallmarks of die and mould making, and have a substantial influence on cutting tool demands. According to Iscar only a holistic tool development concept based on these features, combined with integration of Industry 4.0-inspired digitalization developments, will lead to successful solutions for the die and mould sector.

Challenging materials

The main material for the die and mould industry is steel that is often hard. Workpiece hardness is a principal factor in influencing tool material and cutting geometry. Various repair methods for worn or damaged moulds and dies use welding, thermal metal spraying and laser treatment, etc., which are applied to the affected surfaces. Further machining of these surfaces requires a cutting tool to remove a material stock combining very hard and relatively soft layers. This condition significantly reduces tool life and requires tool manufacturers to make extra efforts to compensate and ensure the necessary durability.

Intricate shapes

Moulds and dies feature complex shapes. A three dimensional (3D) profile is typical for the working surfaces of a mould (die) set, and the ability to machine 3D surfaces effectively is an important requirement for cutting tools. A tool is expected to provide the required parameters for shape accuracy and surface finish, and to ensure the appropriate level of tool life needed to complete machining the shape or its pattern in one operation.


Manufacturing moulds and dies requires various machining processes: turning, milling, drilling, reaming and others, although cutting tools for die and mould making are associated primarily with mills. The specific character of the die and mould industry – the predominance of non-rotating parts, the complex shape of machined surfaces, the necessity to produce a lot of cavities that require considerable material stock removal, etc. – positions milling cutters in the first place among tools utilized by this branch.

In their constant need to boost productivity in manufacturing moulds and dies for new products, the die and mould industry was one of the first adopters of advanced machining methods such as high speed milling (HSM) and high feed milling (HFM), and to develop efficient machining strategies.

The progressive methods and techniques that were introduced impacted greatly on cutting tools, leading to new requirements for tool manufacturers. Over the years, these requirements have become increasingly tighter; today die and mould makers represent among the most exacting cutting tool consumers and expect cutting tool manufacturers to be responsive to the industrial trends.

Iscar has cooperated successfully with the die and mould industry over the years, and constantly improves its solutions for die and mould manufacturing by introducing new products and upgrading the existing ones, as well as providing complex tooling projects and consultations.

Cutting tool grades

In die and mould making, indexable extended flute (also referenced as long edge) milling cutters are often applied to rough machining cavities and wide edges. The cutters work in high-load conditions, and the material of the indexable insert is a key factor for improving tool life. In the last few years Iscar has introduced IC845, a cemented carbide grade, that features a new tough substrate and a new nanolayer PVD coating with applied Sumo Tec post-coating treatment technology. The grade was designed especially for cutting at significant impact load. The inserts made from IC845 demonstrate substantially better tool life, which in turn improves performance of the extended flute cutters and slot milling cutters carrying the inserts.

Iscar’s solid carbide endmill line has been enhanced by adding the IC702 carbide grade, which is intended for efficient machining of hard materials (up to HRC 65).

Advanced profiling

In machining complex surfaces, the real workhorses are milling cutters of toroidal- (button-) and ball-nose shapes. Iscar offers die and mould makers an extensive line of these cutters in the following designs: tools with indexable inserts, endmills with exchangeable cutting heads, and solid carbide endmills. They differ in nominal sizes, accuracy, mounting method (shank- or arbor-type) and application range, according to whether the workpiece hardness is low, moderate or hard.

Mould and die making is characterized by a large proportion of small- and medium-size producers. For these manufacturers, tool versatility (multifunctionality) is an important factor in tool choice.

Iscar’s recent Logiq campaign introduced a new product targeted especially to this challenging market – the Tor6Mill family of indexable milling cutters. A Tor6Mill cutter (see top image) can carry inserts in four different geometries. Mounting the appropriate insert in the cutter transforms it to a toroidal, 90°, 45° or high feed milling tool. The cutter can be applied to machining 3D surfaces, square shoulders, plane faces, chamfers, or use as a productive high feed rougher.

Innovative technologies

High feed milling and high speed milling proved to be powerful methods for dramatically increasing machining productivity while reducing manual operations, consequently shortening production time significantly. Due in no small part to timely introduction of these efficient methods, the die and mould industry succeeded in filling the sharply increased demands for moulds and dies that occurred in the 1990s.

High feed milling

Today, cutting tool producers provide a great choice of high feed milling cutters, and Iscar’s range of high feed (also known as fast feed or FF) milling tools seems to be the widest. Iscar’s standard high feed milling line comprises more than 10 tool families that differ in their design principle (indexable, solid, with replaceable heads), nominal diameter, cutting geometry, mounting method and applicability (machining faces, pockets, deep cavities). This diverse range enables die and mould makers to select the optimal cutter for their needs.

Iscar views high feed milling tools as important productivity boosters and continues to develop the line by introducing new families and improving the existing ones. Not surprisingly, the leading milling products presented in Iscar’s recent Logiq cutting tool marketing campaign were related directly to fast feed cutters.

Nan3Feed and Micro3Feed, two of the latest Iscar families of indexable high feed milling tools, feature an 8-16 mm (.315-.625 in) diameter range. Even though solid carbide endmills traditionally dominate this range, Iscar’s specialists believe that the advantages of the indexable-insert concept for rough machining will position the families as serious cost-effective alternatives to the solid carbide designs.

Fig 2: Iscar Logiq4Feed

The Logiq4Feed family of fast feed cutters (Fig. 2) features “bone-shape” double-sided inserts. This unusual insert profile provides four cutting edges, with an exceptional ramp-down capability that defines the main application of the family: high-efficiency rough milling of cavities, particularly deep cavities. The cutters are suitable for machining workpieces with hardness up to HRC 50.

High speed milling

Expanding the range of products intended for high speed milling, Iscar introduced multi-flute solid carbide endmills in 2-20 mm diameters (0.25-0.75 in) for high speed finish and semi-finish milling. The endmills are produced from the ultra-fine IC902 carbide grade, which was developed to machine hard materials, and have a cutting-length-to-diameter ratio of up to 6. They are operated at rotational speeds up to 20000 rpm. The application of solid carbide endmills for rough milling of slots and open pockets – by trochoidal technique and at high metal removal rate (MRR) – has also reached the attention of die and mould makers.

Multi-Master options

The need to customize moulds and dies to products is why die and mould manufacturing is often low volume or even single piece, which results in a large number of small- to medium-size shops involved in die and mould making. For these manufacturers, efficient utilization of cutting tools and well run tool stock management is of key importance. However, customization often requires a specific tool configuration in order to machine hard to reach part areas. Not every cutting tool in a tool stock is optimal for this type of machining but “customizing” the tool by ordering a tailor-made design is far from the best solution.

Fig 3: Iscar Multi-Master indexable heads

Iscar’s Multi-Master (Fig.3) family of assembled tools with exchangeable cutting heads helps to overcome these difficulties.

According to the Multi-Master concept, the head is suitable for mounting in different tool bodies (shanks), and the shank can carry different heads. The heads are varied in shape, cutting geometry and sizes and are designed for machining 3D surfaces and shoulders, faces and slots, chamfers and holes. The cylindrical and taper neck shanks feature different dimensions for a broad ranging overhang; their design options ensure clamping in toolholders, collet chucks or in a machine tool spindle directly.

The Multi-Master, with its variety of heads, shanks, reducers and extensions, enables over 40,000 possible tool configurations. The Multi-Master tools wholly meet the requirements of the important “no-setup time” principle, as replacing a worn head does not require additional setup operations. The head can be changed without removing a tool from a machine, which significantly decreases downtime. These features make the Multi-Master family extremely popular in the die and mould industry.

Digital tool assembly

The low volume character of die and mould manufacturing and highly precise machined shapes make any deviation from die (mould) specifications an Achilles heel. Even a small error threatens rejecting a whole product. Driven by Industry 4.0 developments, digitalization in modern manufacturing is providing die and mould makers with an effective instrument for overcoming this obstacle – computer modelling of machining processes. This ensures the implementation of productive machining strategies, tool path and cutting data optimization and prevention of possible collisions.

Iscar expanded its world of digitalization by introducing a milling tool assemblies option in its electronic catalog, which contains accessible and accurate tool data for digital pre-machining. Creating a digital tool representation of a tool assembly, based on standard ISO 13399, facilitates accurate communication of tool information between software systems. Integrating this new function into the CAD/CAM system of a die and mould manufacturer can prevent errors on the shop floor during machining, while the ability to plan multiple assemblies saves time and cost in the planning process. The company plans to expand its Industry 4.0 data driven products and to connect the digital and virtual worlds of modern manufacturing for die and mould makers.

Many products around us are manufactured using moulds and dies, and demand for these products grows constantly. Advances in industrial branches such as the automotive industry, a leading consumer of moulds and dies, have a great impact on die and mould making. More requests for moulds and dies will lead to a new level of requirements for the cutting tools that die and mould makers need. Iscar holds that cutting tool manufacturers should anticipate these demands and act accordingly by providing the necessary solutions.

Share This Post

Recent Articles

WordPress Ads
Wordpress Social Share Plugin powered by Ultimatelysocial

Enjoy this post? Share with your network