CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

LATEST MAGAZINE

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

CANADA'S LEADING INFORMATION SOURCE FOR THE METALWORKING INDUSTRY

High feed cutting for mould and die applications

Share This Post

Dormer Pramet has introduced the Pramet ISBN10 cutter.

The ISBN10 is suitable for high feed milling, copy milling, ramping, helical interpolation, slotting and plunging. The pocket design in combination with the ANHX10 insert also perform shoulder and face milling, offering coverage of mould and die applications from roughing to finishing.

A range of diameters are available from 0.625 to 1.500 in. (15.875 to 38.1mm) and multiple types, including parallel and modular shanks and shell mills.

To go with the ISBN10, the Pramet BNGX10 is a patented, double sided insert with four cutting edges.

The design makes it suitable for high feed roughing even with long overhangs, while being compatible with three geometries covering most machined materials. Geometry M is for steels and cast irons, MM for low carbon steels, stainless steels and super alloys, while HM is suitable for hardened materials.

A new range of Pramet ANHX10 inserts is now available for finishing operations in shoulder milling, suited for wall and bottom finishing. The single-sided insert has two cutting edges and a positive geometry for long overhangs, helping to decrease vibrations and reduce noise. ​

Both inserts offer a smoother cut while a special through coolant design delivers lubrication nearer to the cutting edge. This allows for high feed rates with axial depth of cut up to 0.04 in. (1mm). The HFC design has a low setting angle stretching the feed over a large cutting edge thus reducing the thickness of the chip allowing for higher feed rates.

Share This Post


Recent Articles



WordPress Ads
Wordpress Social Share Plugin powered by Ultimatelysocial
error

Enjoy this post? Share with your network