PFERD CORINOX machinist's filesClick image to enlarge

Swiss pattern CORINOX machinist's files from PFERD are designed for use on stainless steels and exotic alloys. With a surface hardness of 1,200 HV (Vickers Scale), and 70 Hrc, these files offer excellent wear resistance and long service life.

Their specially coated surface leaves no corrosive residue on the workpiece and effectively resists loading. They are available in a variety of configurations including pillar, half round, round, three-square, and needle.

The hand files are in lengths of 6 in. with a 5/8 x 5/32 in. cross section, 8 in. with a 25/32 x 7/32 in. cross section, and 10 in. with a 31/32 x ¼ in. cross section. Pillar files are in lengths of 6 in. with a 1/2 x 5/32 in. cross section, and 8 in. with a 9/16 x 7-32 in. cross section. The half round configuration is available in lengths of 6 in. with a 9/32 x 5/32 in. cross section, and 8 in. with a 3/4 x 7/32 in. cross section. The round configuration is available in an 8 in. length with a 5/16 in. diameter. The three-square comes in an 8 in. length with a 5/8 in. cross section. Square configuration files are available in a 6 in. length with a 7/32 in. cross section. Needle files are 7 in. in length.

CORINOX needle files are made for use in ultra-fine, intricate stock removal on harder, temperature-resistant materials such as NiCo alloys and difficult-to-file materials like high-grade steels such as V2A and V4A, as well

as high-temperature steels, rare alloys and fiber-reinforced plastics. Due to their high surface hardness all CORINOX files are characterized by significant wear resistance and durability.

CORINOX needle files are ideally suited for use in tool and die making, pattern making, turbine production and maintenance, aircraft production, and are available in various cross sections and cut densities.

Similar Articles

Entry level waterjet machine

An entry level waterjet machine, the MWX3 is a new machine from Mitsubishi designed for production environments and customers new to waterjet.

New automation in bending software

SigmaTEK Systems LLC has developed SigmaBend AP, the latest software version that incorporates the unfolding functionality of AutoPol (FCC Software AB) into SigmaTEK’s press brake solution SigmaBend AP.  

Welding trainer supports welding 18 in. joints

RealWeld Trainer, the only in-situ welding training device designed to record and score welding technique while performing real arc-on welds, has been enhanced to allow for testing 18-in. (457 mm) weld joints.

Edge profiling technology

Hypertherm's True Bevel is a new edge profiling technology designed to help fabricators and CNC table manufacturers achieve accurate bevel cuts more easily than before.

Bandsaw with increased cutting output

The new Behringer HBE Dynamic Series bandsaws use a high torque, frequency controlled blade drive motor. The specialized gearing in the drive is engineered to produce the blade power and speed needed to achieve fast cutting and peak throughput rates. Because the drive is low horsepower and energy efficient, power consumption is reduced while energy savings and high production are realized. The new saw is designed to meet a broad range of applications in the steel trade, mechanical engineering, tool making and in high-end metalworking shops.

Stay In Touch

twitter facebook linkedIn