Walter USA boring barClick image to enlarge

Walter has unveiled the Walter Cut G1221-P, a grooving boring bar with precision cooling, designed for recessing and internal grooving.

This monoblock boring bar has two coolant holes. The first coolant hole allows the coolant to exit the insert top clamp directly to the cutting edge in the radial groove, thus providing precision cooling. The other coolant hole, at the front of the bar, can either be left open to evacuate chips out of a blind bore, or sealed off when in a through-bore to provide increased coolant to the cutting edge.

Additionally, an O-ring is recessed into the bar clamping diameter to prevent pressure loss and provide leak free coolant supply to the cutting interface. This is particularly helpful on machines with low coolant pressure.

The new Walter Cut G1221-P can also be used in both the normal and overhead position. This boring bar system holds GX09 and GX16 inserts. The insert widths go from 0.062 to 0.125 in. (0.8 to 3.5 mm). The system is suitable for internal grooves from Dmin = 0.63 in. (16 mm) and for grooving up to depths of 0.39 in. (10 mm) in all ISO material groups.

Similar Articles

Improved tool-spindle connection rigidity

When machining tough materials like titanium, there is a need for a spindle connection that makes the best use of available power.

Holemaking MetalTech Report

Emuge
Multi-purpose tap
Emuge Corp.’s MultiTap is what the company describes as the industry’s first high performance tap designed to cut a wide range of materials including carbon steel, steel alloys, stainless steel, aluminum, cast iron, copper, brass, and bronze.

Toolholding for high performance machining

 A toolholding system for high performance machining developed by German tooling manufacturer Haimer is gaining in popularity in North America.

Iscar at IMTS: Smart metal cutting

Iscar is launching a new line of cutting tools at IMTS, recently unveiled as the IQ series.

Stay In Touch

twitter facebook linkedIn