Tang4Feed family of high feed shell mill cuttersClick image to enlarge

Iscar has introduced the Tang4Feed family of high feed shell mill cutters for oil and gas applications.

Carrying tangentially clamped rhombic inserts with four cutting edges, Tang4Feed cutters are designed for milling rough/semi-finish and sculptured surfaces, in diameters ranging from 40 to 100 mm, with up to 1.5 mm depth of cut.  These features provide a good ramp down and side plunging capability with excellent chip flow and a high metal removal rate, due to a small entrance angle that enables high table feed at shallow depth of cut and materials that are machined on oil and gas exploration equipment.

Similar Articles

More uniform grip with jaw forming ring grips

The Dillon jaw forming ring is an easy-to-use tool that provides a more uniform grip on the workpiece, according to the company.

A welcome power cut

Article courtesy of Iscar

The quest to reduce levels of power consumption in the global metal cutting sector is not a new trend; today it has become an essential technical requirement.

Figure 1

Accurately measure workholding grip force

Kitigawa NorthTech's Digital Grip Force Anaylizer software and kit measures workholding grip force for machine shops.

9 axis twin spindle mill/turn centre

The T8 Hybrid 9-axis twin spindle mill/turn centre from Quicktech combines a three axis power turret and a 360˚ B axis with a sub-spindle that features a four axis gang slide to enable complete machining of complex parts with a capacity of 38 tools.

Multi-tasking for large part, deep hole drilling

Mazak's Quick Turn Nexus (QTN) 550 MY multi-tasking turning centre that features a long boring bar to handle long, large workpieces.

Stay In Touch

twitter facebook linkedIn